Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2007
Posts: 15
emt Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 15
Have a quick question.
On the old Samsung DCS systems you could connect a phone to a phone using a KDb-DLI card if it has that card installed. Then both phones have different extension numbers off the same station port.
Phone station port---------------------phone---------------------phone

When this is done how do you identify the station port on the phone system that is using the piggy back phone?
I can tone the first phone back to system but not the 2nd.

I looked at mmc 724 but I could not see where you change station numbers on that old system.
I know I’m missing something somewhere you should be able to say card 3 port 3 is station 232

Thank you
Larry Hall
Electro Mechanical Technology



Last edited by emt; 06/18/14 08:39 PM.

Larry Hall
Electro Mechanical Technology
Samsung and Panasonic Systems
Joined: Sep 2001
Posts: 2,259
Likes: 2
pvj Offline
Moderator-Executone-Isoetec, Samsung
*****
Offline
Moderator-Executone-Isoetec, Samsung
*****
Joined: Sep 2001
Posts: 2,259
Likes: 2
If you look in 724 your answer will be there.On a DCS Compact or a 50Si or a 100 that will support the daughterboard cards in mmc 724 the first port ie 001 will be the main port and 002 would be the secondary port.For a Compact every extension can have a secondary port but a 50 or 100 can only support it on the 8 built in ports so only those first 8 ports would show a secondary port . So in 724 you will eventually see something like
Port 005 223 Port 006 323

That would mean that the secondary port 323 is the daughterboard card on extension 223. And that is what a default would look like.The main port has a 223 extension and the secondary port would be 323.Of course that can be changed in 724 but all you need to do is find the extension in 724 and the extension listed before that is the main port where the daughterboard card is installed.

If you can tone back the main extension like you said then you should also be able to "see" the daughterboard extension running back on another pair of the same cable. Unless they are using a 25pr cable or similiar.If that was the case you would have to follow the jumpers being used on the cable feeding the main extension.

Last edited by pvj; 06/18/14 09:12 PM.
Joined: Nov 2007
Posts: 15
emt Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 15
Thank you this help a lot
Larry


Larry Hall
Electro Mechanical Technology
Samsung and Panasonic Systems
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
I think you can get that from MMC 108 or 208, it lists all the station attributes and as PVJ says the 2nd port should be 100 higher than the primary extension. By default 203 would have 303 as a second port. Can change that in 724.


THE Bracha, old blond specialist in Rube Goldberg solutions.

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,378
Posts634,603
Members49,525
Most Online5,661
May 23rd, 2018
Popular Topics (Views)
Today's Birthdays
djone21, glacier37, Supert8ch
Newest Members
NiagaraGuy, Luv2uallday, FredSkidoo, tspa, xtrememachines
49,525 Registered Users
Top Posters (30 Days)
Toner 20
dexman 10
R4+Z 6
Who's Online Now
0 members (), 16 guests, and 15 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Telephone Systems Canada | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5