|
|
|
|
Joined: Jul 2005
Posts: 210
Member
|
OP
Member
Joined: Jul 2005
Posts: 210 |
Does anybody have the manual for the NEC AD(A)-R unit? It's a recording adapter for Dterm i phones and has a bunch of dip-switches on it and I need to know how to set those switches for it to work.
Even if you don't worry about sending the manual, just describe here what those switches do, that will help.
Thank you.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2014
Posts: 365
Member
|
|
Member
Joined: Mar 2014
Posts: 365 |
This can be found in the key system IPK installation manual.
Table 9-2 AD(A)-R Unit Switch Settings
Switch Description/Settings
SW1
SW1-1 Connects to Multiline Terminal
Connect = Default
SW1-2 Not Used
SW2
SW2-1 Sets External Equipment Impedance to 600 Ω
SW2-2 Used for Complex Impedance Devices
(< 30 Ω Input Impedance)
Dip
Switches
(DSW)
DSW 1
Output Hook Signal to External Device
On = Output
Off = No Output (Default)
DSW 2
Record Confirmation Tone
On = Tone On
Off = Tone Off (Default)
DSW 3
and
DSW 4
Use T1/T2
On = Disable (Default)
Off = Enable
DSW 5
Reset Signal Upgrade
On = Normal (Default)
Off = Debugging
DSW 6~8
Firmware Upgrade
On = Firmware Upgrade
Off = Disable (Default)
Do not connect T1 and T2 when DSW switches 3 and 4 are On
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
124
guests, and
359
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
