Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Voicemail Issue
#57457 08/09/07 06:52 AM
Joined: Aug 2007
Posts: 3
Member
OP Offline
Member
Joined: Aug 2007
Posts: 3
Hello,

This is my first post here.

I have recently taken over a network tech position at a company with Inter-Tel Phone system. I have had an issue come up last week that I cannot figure out.

One of our users voicemail has stoped working. After dialing the extension the phone rings 4-6 times then drops back to the main directory. On the other hand if the user puts his phone on DND any calls made to his extension will go straight to his voicemail.

This issue applies to calls to his extension from Inside and Outside lines.

Im lost! I appreciate any help!

EMP & Lightning Home Surge Protection
EMP - Click Here!
Re: Voicemail Issue
#57458 08/09/07 07:28 AM
Joined: Jun 2007
Posts: 490
Member
Offline
Member
Joined: Jun 2007
Posts: 490
His system forwarding path is not configured properly, likely it is only flagged for DND status. Check System\Devices and Feature Codes\[Stations|Endpoints]\Forwarding Paths


ShoreTel, Inter-Tel, Mitel, NEC, Zeacom, Cisco, Digium, Adtran Certified
http://www.voipnetworkengineering.blogspot.com
Re: Voicemail Issue
#57459 08/09/07 09:12 AM
Joined: Aug 2007
Posts: 3
Member
OP Offline
Member
Joined: Aug 2007
Posts: 3
Thank you Chris, There was no forwarding on his physical extension line, adding one did fix the voicemail issue.

I hate to be a pain but a new issue arrised for the same user.

Any internal calls his extension recieves are automatically answered and put into speakerphone. External calls work normally. I have checked flags on physical and virtual stations with known working lines and did not see any difference.
If you have any information, I would appreciate it!

Thanks Again.

Robert Shaffer

Re: Voicemail Issue
#57460 08/10/07 07:46 AM
Joined: Aug 2005
Posts: 908
Member
Offline
Member
Joined: Aug 2005
Posts: 908
It is set to automatically answer internal calls (IC). At the users keyset, enter feature code 319. This eliminates the hands free option.

Re: Voicemail Issue
#57461 08/14/07 11:46 AM
Joined: Aug 2007
Posts: 3
Member
OP Offline
Member
Joined: Aug 2007
Posts: 3
Thank you dfleschute, your answer corrected the issue.


Moderated by  Stix1 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Yealink W53P SIP DECT on Allworx
by aweaver - 09/24/20 02:07 AM
adaptor cables
by Bushmills - 09/23/20 06:47 PM
NVM 2000 VS Voice Support
by teldata1 - 09/23/20 11:11 AM
Who's Online Now
20 members (gelehu, LenShustek, Keyset6, KRRath, Silversam, Ruben, pvj, justbill, Big Alan, Corrupted DNA, Yoda, Carl Navarro, metelcom, teldata1, simsh, Touch Tone Tommy, Bob3470, nortelvoip, Mercenary Roadie, aweaver), 383 guests, and 54 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,964
Posts637,288
Members49,353
Most Online5,661
May 23rd, 2018
Today's Birthdays
OBTW, warged
Newest Members
Big Alan, simsh, bencahill, katbutters, crazy88
49352 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 35
hbiss 13
teleco 10
Ruben 7
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners