|
|
Joined: Sep 2007
Posts: 1
Member
|
OP
Member
Joined: Sep 2007
Posts: 1 |
Have a peculiar problem I can't seem to find the answer to. Using an Inter-Tel 5000, V1.2.5.111 via DB Studio.
Internally, the phones ring 12 times before transferring to voicemail. Externally through the PRI they ring 4. I can't find where this can be changed anywhere in DB Studio. There should be some where to change it, but I just can't seem to find it in all of the archaic options they have listed.
Thanks,
Jim
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
Member
Joined: Aug 2005
Posts: 908 |
Are you using separate forwarding paths for CO and IC calls?
Look in Voice Processor/Timers and limits/Timers and limits. There are two No Answer settings by number of rings. Notification and Transfer.
|
|
|
|
Joined: Aug 2001
Posts: 774
Member
|
Member
Joined: Aug 2001
Posts: 774 |
One CO ring is 6 seconds in length, and 1 IC ring is 2 seconds in length, so I would guess that your timer is set at 24 seconds which would give you 4 rings on an outside call and 12 rings internally. They can be adjusted, but will work together. Tho as dfleschute was inferring, you can trick the system and make it ring twice to one of them.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|