Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
I put a refubed Aspire S into a site recently, so I could network it to an Aspire M at another site. All that is working well.

I set up Intramail on the Aspire S and in general, it's working fine. I have the after hours calls going to a Call Routing mailbox one on the system - with that box using Dial Action Table number one. Pretty sure that's all good.

The issue is that when the caller presses a button for one of the options, nothing happens. Eventually the box times out - but as far as I can tell - the system does not recognize DTMF tones within Intramail.

Wondering if there is a DTMF decoder on the VM daughter board that might not be working? Or, is there some other settings I might have missed? I have set up a number of Intramail over the years, so I think I have this set correctly - but I'm open to suggestions. The Intramail and VM daughter board (like the rest of the system) are used items.......


Atcom VoIP Demo
VoIP Demo
Joined: Apr 2005
Posts: 2,472
Likes: 1
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,472
Likes: 1
Does pressing any button interrupt the AA message?
Is the time out transfer working?

Last edited by dans; 03/18/15 05:04 PM.

We get old too soon, smart too late
Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
No, pressing the buttons does not interrupt the message. I think timeout transfer is working - but I can't say that I am 100% sure. I will need to have them test that and let me know.......

Joined: Apr 2005
Posts: 2,472
Likes: 1
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,472
Likes: 1
In extension setup you need to confirm the voice ports for signaling type are set as DP and terminal type as special.


We get old too soon, smart too late
Joined: Sep 2004
Posts: 4,112
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,112
How are the calls getting to the Aspire S local dial tone or across the Aspirenet?

Joined: Jun 2004
Posts: 1,367
Member
*****
Offline
Member
*****
Joined: Jun 2004
Posts: 1,367
+1 on Dans response.
On a side note does anyone know the reason why DP? always seemed counter intuitive on that.


[Linked Image from i26.servimg.com]
TouchPoint Networks.

Serving the Northwest Since 1991
NEC Shoretel Zultys T3 Tadiran
Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
I did check the setup of the extensions and they are indeed set for DP/Special. The Aspire S auto-configures that stuff. Outside lines are local analog trunks - Aspirenet is just used for site-to-site calling and tranferring outside calls between sites.


Joined: Oct 2004
Posts: 1,486
Member
*****
Offline
Member
*****
Joined: Oct 2004
Posts: 1,486
how about your DTMF resources. You need atleast 1 set for Common

Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
The Aspire S has 16 DTMF resources. They are all currently set for common. I assume that's the default, since I have not changed anything there.

Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
Here's some additional information. And, I know this is wrong - just not sure it should effect DTMF detection.

I left the Voice Mail pilot number as 700 (default) on both sites. I am thinking that changing it to 600 on the Aspire S side would be easy enough.......

Anyone think that's why the DTMF detection is not working?

Page 1 of 2 1 2

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,735
Posts636,399
Members49,615
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
BroadcastEngineer, itrains, James Walker, Mpp1994, rockie, sarah1klein, thomas TES-824
Newest Members
AMS Technology C, Chrontel, RonZ1971, Michael1948, lllDez
49,615 Registered Users
Top Posters(30 Days)
jsaad 7
Toner 6
Who's Online Now
0 members (), 3 guests, and 17 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5