Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
#588208 04/27/15 02:18 PM
Joined: Jun 2004
Posts: 302
mfecko Offline OP
Member
OP Offline
Member
Joined: Jun 2004
Posts: 302
I'm trying to connect a Cisco SPA 112 to a telephone system that supports SIP 3rd party extensions.

The install instructions are not very clear.

I need to register this device locally for test purposes.
Then, I need to register these devices from off site locations.

I've put in the server IP, user name and password, but the unit is not registering.

Any help would be appreciated.

mfecko #590733 06/30/15 04:52 AM
Joined: Mar 2014
Posts: 160
Member
*****
Offline
Member
*****
Joined: Mar 2014
Posts: 160
Have you checked the programming in the phone system?

mfecko #591344 07/21/15 05:49 AM
Joined: Mar 2014
Posts: 160
Member
*****
Offline
Member
*****
Joined: Mar 2014
Posts: 160
If I am not wrong, SPA 112 has both username and user ID, try to put in Server IP , user ID, password.

mfecko #619213 04/25/18 05:05 AM
Joined: Apr 2018
Posts: 2
Member
Offline
Member
Joined: Apr 2018
Posts: 2
That's a tough situation, and there are lots of things to go wrong.

I suggest you try these steps:

  • Verify that the server has the extension number and password that you think it does.
  • Check the server logs and verify that the SPA-112 is getting packets into the server.
  • Check that the SPA-112 has an IP address in the same subnet as the VoIP server. Put the IP address, Gateway, and Subnet Mask in manually, and put them both on the same Ethernet switch if there's any doubt about connectivity.
  • Ask every SPA-112 user you can find if they have connected an SPA-112 to the same type of server you use, and get their config files!


HTH.

Bill


Retired Central Office Repairman, rated in Toll and SARTS
mfecko #619410 05/01/18 12:44 PM
Joined: Mar 2018
Posts: 341
Likes: 1
Member
Offline
Member
Joined: Mar 2018
Posts: 341
Likes: 1
I doubt that you are trying to connect it to an Ipitomy system, but here is their wiki page on how to configure it.

https://wiki.ipitomy.com/wiki/Cisco_SPA112_FXS_Gateway


The Cloud is just someone else's computer!
mfecko #619414 05/01/18 01:52 PM
Joined: Dec 2007
Posts: 6,715
Likes: 6
Retired Admin
*****
Offline
Retired Admin
*****
Joined: Dec 2007
Posts: 6,715
Likes: 6
This post is THREE YEARS old.


Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby
https://www.facebook.com/Dean-Wilson-Photography-112841337020414

Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."

Moderated by  5years&counting 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,375
Posts634,587
Members49,525
Most Online5,661
May 23rd, 2018
Popular Topics (Views)
Today's Birthdays
apexnetworks, blpogue, Hillyard, Silversam
Newest Members
NiagaraGuy, Luv2uallday, FredSkidoo, tspa, xtrememachines
49,525 Registered Users
Top Posters (30 Days)
Toner 17
dexman 12
R4+Z 6
Who's Online Now
0 members (), 5 guests, and 7 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Telephone Systems Canada | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5