|
|
|
|
Joined: Jul 2004
Posts: 291
Member
|
|
Member
Joined: Jul 2004
Posts: 291 |
My carrier installed new PRI Circuits off a META Switch. My other PRI's are coming off a 5E. Does Eclipse 3.0 have the ability to see this switch type ?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
Eclipse has a couple of switch type choices (CtrlC + PRI - somewhere there). Even with new switch, they can almost certainly emulate a 5E for you, and use any standard protocol, making it a non-issue.
|
|
|
|
|
Joined: Dec 2008
Posts: 280
Member
|
|
Member
Joined: Dec 2008
Posts: 280 |
Correct go to Ctrl-C then Q for Pri Parameters
At the bottom you will see the switch type:
01 – AT&T Custom
02 – National NI–2
03 – DMS–100
5E is AT&T Custom I do believe. To change just hit enter until you are down there and the I - D key changes value.
And remember this:
Parameters for the PRI circuit are programmed on the PRI Parameters screen. This
screen requires password level 8 for access. Changes made on this screen do not take
effect until the PRI card is reset.
mjc
|
|
|
|
Forums84
Topics94,551
Posts640,108
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (SamF, Toner),
183
guests, and
22
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
