|
|
Joined: May 2012
Posts: 14
Member
|
OP
Member
Joined: May 2012
Posts: 14 |
Hello everyone. Hoping for some help here. Thank you for all the help in the past. I have a customer that is looking to setup just 1 mailbox on their CTX100. When they were trying to do so they managed to get the system to not answer at all and they called me. They do not know the password and I am unable to get into the system to do anything. Anyone out there that can help us?
Thanks! Chris
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
If it doesn't answer, there's not much you can do remotely. You'll probably want to go on site to fix this and then reset the password using your laptop.
|
|
|
|
|
Joined: May 2012
Posts: 14
Member
|
|
OP
Member
Joined: May 2012
Posts: 14 |
I have the card here in the office. I cannot access the card with the laptop.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
What color are the LEDs on the IVP8?
|
|
|
|
|
Joined: May 2012
Posts: 14
Member
|
|
OP
Member
Joined: May 2012
Posts: 14 |
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Are you familiar with connecting to the IVP8?
|
|
|
|
|
Joined: May 2012
Posts: 14
Member
|
|
OP
Member
Joined: May 2012
Posts: 14 |
Yes I can connect no problem. Just not the correct password.
Also any clue why I don't get emails when you respond so I know to login and check?
|
|
|
|
|
Joined: Jun 2016
Posts: 4
Member
|
|
Member
Joined: Jun 2016
Posts: 4 |
I am receiving the following error, using a serial port to USB adapter. All my settings in device manager match those of the VM Manager Software. COM1 Baud: 57600, Data Bits 8, Stop Bits 1.
Any Ideas??
Error Message "Serial Port Resource - Open (CreateFile) Failed on COM1; error 2"
|
|
|
|
|
Joined: Jun 2005
Posts: 2,710 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,710 Likes: 7 |
It sounds like the com port is being used by another program or more likely COM 1 doesn't exist. Typically a USB serial adapter won't be COM 1. My adapter, for examples is usually COM 3, but could be COM 4 or 5 depending on which USB port I plug into.
You may have to double check you Device Manager on you computer to see which port the USB adapter is using and change VM Manager accordingly.
|
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
Use a laptop/computer that has a real serial port and try and connect again.
If you get a password error then that is not a problem and I or a Toshiba tech can change it no problems.
Regards
Carl
|
|
|
|
Forums84
Topics94,312
Posts638,909
Members49,772
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
166
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
