|
Joined: Jul 2003
Posts: 1,231
Member
|
OP
Member
Joined: Jul 2003
Posts: 1,231 |
i have a customer who has a dk280 with an eleen voicemail. when they get a message in the mailbox they dont have a light to show it. i tried giving them a dss button of the pilot ext but that didnt work. also gave them a 499 button and a 481. none of these work. any ideas how to solve this. thanks dave
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2009
Posts: 75
Member
|
Member
Joined: Dec 2009
Posts: 75 |
What is the model of the voicemail?
|
|
|
|
Joined: Jul 2003
Posts: 1,231
Member
|
OP
Member
Joined: Jul 2003
Posts: 1,231 |
not sure but i will go find out. it is a 4 port but i will check for a model number
|
|
|
|
Joined: Jul 2003
Posts: 1,231
Member
|
OP
Member
Joined: Jul 2003
Posts: 1,231 |
ok i went out there and its actually an its vocal but like an eleen. no model number on it. only the name vocal. its 4 ports and 10 hrs. does that help.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
The problem is most likely with the voice mail. I'm not familiar with that particular voice mail system, but check the mailbox lamp settings.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
It is most likely using DTMF integration so the mailbox should be doing a #63 to turn the MW light on and a #64 to turn the MW light off.
Also make sure the first port of the VM is programmed in the MW Centre port Program 13
Regards Carl
|
|
|
|
Joined: Jul 2003
Posts: 1,231
Member
|
OP
Member
Joined: Jul 2003
Posts: 1,231 |
i cant remember. i will go out and check it. thanks dave
|
|
|
|
Joined: Jun 2005
Posts: 2,706 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,706 Likes: 7 |
Just one thing that you could check while you are out there that I have seen 1 time. Some systems use the last port to turn on and off the MSG light. You can check the last port to make sure there is dial tone to the port. I remember at least one time that the modular plug needed to be replaced and the system could not turn on the message lights, but would still answer on the other ports.
If the voicemail ports were setup in a hunt group that would also mean that every 4th or 8th call would be RNA, but not if they set the hunting in series. Sine it would be analog you could also use your test set to hear the DTMF tones after you leave a message, if you can figure out which port the system uses to turn on the light.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
Just one thing that you could check while you are out there that I have seen 1 time. Some systems use the last port to turn on and off the MSG light. You can check the last port to make sure there is dial tone to the port. I remember at least one time that the modular plug needed to be replaced and the system could not turn on the message lights, but would still answer on the other ports. This used to happen with the Stratagy Flash (the brick) when it was sold as a 4 port and someone had only plugged ports 1 and 2 into the SLT ports
Regards Carl
|
|
|
Forums84
Topics94,291
Posts638,806
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|