|
|
|
|
Joined: May 2014
Posts: 28
Member
|
OP
Member
Joined: May 2014
Posts: 28 |
Hi all,
I configured COT direct line for a analog extension (CM 30,Y=02/03: 04 Direct In Terminal).
However, the system keeps routing incoming call to this extension even though it is on call (internal). The caller should get busy tone in this case.
I checked the the CM 30, Y=13/14 and the default setting is "Waiting until the DIT station be comes idle.
Is there any option that I will get busy tone in this situation?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2014
Posts: 365
Member
|
|
Member
Joined: Mar 2014
Posts: 365 |
Verify there is no call forwarding set on that station, or call waiting.
|
|
|
|
|
Joined: May 2014
Posts: 28
Member
|
|
OP
Member
Joined: May 2014
Posts: 28 |
No call forwarding or call waiting is set on this extension.
I go with Direct Inward Terminal setting for analog trunk. So, if the extension is busy, it will follow setting of CM30, Y=3/4 (Handing of busy/not available Direct-in Termination destination in day/night mode).
Options of CM30, Y=3/4 are:
- 01: Forward to TAS BUZZER indication
- 04: Forward to Attendant Console
- 06: Automatic Camp-on
- 15(def): Keep the call ringing (wait until the station becomes idle)
No option for "Busy".
so how? Other setting to get the busy tone for this case?
|
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
150
guests, and
299
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
