|
|
|
|
Joined: Mar 2014
Posts: 8
Member
|
OP
Member
Joined: Mar 2014
Posts: 8 |
Good afternoon all,
I've got a SIP trunk on a MIPU-24 setup on channel group 20 with ILG 20 configured for DID. The incoming DID numbers are three digits in length matching our three digit internal extensions; DID is configured to ring the appropriate extension. DID calls come in on the SIP trunk and ring on the extensions fine.
The issue is that the DP5000 series (have not tested with any others) telephone displays show "DN: 123" (first line; where 123 is the DID #) and "CHG 20 RINGING" (second line). If I hit the DSPLY softkey the display toggles to show the caller ID number and name.
I would like to get the display to show the caller ID name and number by default rather than the called extension DN and "CHG 20 RINGING".
Caller ID name and number shows up by default when the extensions are rung from our Centrex lines (with the help of a Toshiba LUCA).
Any ideas on how to get the SIP trunk DID calls to show caller name and number information by default.
Thanks!
Daryl
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 2,702 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,702 Likes: 7 |
System Data, FB 19 Display Preference . Change it to Caller ID.
|
|
|
|
|
Joined: Mar 2014
Posts: 8
Member
|
|
OP
Member
Joined: Mar 2014
Posts: 8 |
Forgot about that. That of course solves the problem.
Thanks David!
|
|
|
|
Forums84
Topics94,279
Posts638,738
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
104
guests, and
71
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
