|
|
|
|
Joined: May 2014
Posts: 19
Member
|
|
Member
Joined: May 2014
Posts: 19 |
I have a strange problem! The CO upgraded thier switch and tells me that the T1 I have installed is not sending a proper Idle code. They tell me it looks as if it is a loop start circuit instead of a tie line .. I have ARTD set for wink/wink, there are two groups, an outgoing route and an incoming DID and all 24 circuits work, no trouble with inc or outgoing calls ... there is a switch setting on the card that says "send Idle code" but when I turn that on, the card wont restore ... what can I be missing?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
So, it was working they upgraded and now it's your issue? I think the CO has something provisioned wrong.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
151
guests, and
59
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
