|
|
|
|
Joined: Oct 2007
Posts: 44
Member
|
OP
Member
Joined: Oct 2007
Posts: 44 |
Hello. I have an ATM switch, connected to 3 cabinets (5 cabinets in total). I have a CPS and VPU. Version 9.0 We are replacing our core switches for our network this weekend. I know the IP addresses for the CPS and VPU, but not the ATM switch. Is there an easy way to figure that out. I know you can connect via the serial connection, terminal session, but didn't know if that was safe to do without defaulting something. Any help is appreciated.
Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2007
Posts: 44
Member
|
|
OP
Member
Joined: Oct 2007
Posts: 44 |
Never mind, got a call back from the vendor. Figured it out. Thanks.
|
|
|
|
|
Joined: Nov 2008
Posts: 4
Member
|
|
Member
Joined: Nov 2008
Posts: 4 |
you should not have to mess with the atm switch
the default address is 192.168.200.200 if I remember correctly - you should be able to web to it from the cps then look for the external ip
but in reality - the marconi does not connect to the core network for anything
|
|
|
|
Forums84
Topics94,285
Posts638,781
Members49,766
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
143
guests, and
174
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
