|
|
|
|
Joined: Mar 2008
Posts: 46
Member
|
|
Member
Joined: Mar 2008
Posts: 46 |
I've been learning on the job with programming a Toshiba Strata DK280 from scratch... It helps to have a manual... all the DK phones are doing what I want... there's one analog station that I can't get to break dial tone... is it a bad circuit board or did I miss a programming step?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2014
Posts: 34 Likes: 1
Member
|
|
Member
Joined: Jul 2014
Posts: 34 Likes: 1 |
I've only done analog once... but it "just worked" once I told the processor what type of card was in the slot... (it'd had a digital card in the slot before, and it was doing a whole lot of nothing until I looked up the right code in the wonderful manual and changed it) 
|
|
|
|
|
Joined: Jun 2005
Posts: 2,722 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,722 Likes: 7 |
Did you already cycle power after changing the card type in program 03?
|
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Is there a DTMF receiver RRCS ?
|
|
|
|
|
Joined: Dec 2015
Posts: 38
Member
|
|
Member
Joined: Dec 2015
Posts: 38 |
Yes to what Steve said above. If you don't have a RRCS 4, 8 or 12 DTMS receiver installed on the RCTU processor card and tell it in program 03 that it is there, you won't break dial tone.
|
|
|
|
|
Joined: Mar 2008
Posts: 46
Member
|
|
Member
Joined: Mar 2008
Posts: 46 |
another question... if I use program 03 for that slot, then power cycle, will it affect the existing programming memory for the rest of the slots?... I'm nervous cuz I had to program it from scratch cuz the processor battery might be probably dead
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Well if the battery is dead, then sooner or later it will lose its programming if the power goes out on it for whatever reason. It would be wise to address the battery issue now before continuing the programming. The DK280 processor is real old and I wouldn't be surprised if the battery is dead on it.
|
|
|
|
Forums84
Topics94,515
Posts639,962
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (PhoneGuy827, Yoda),
140
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
