|
|
|
|
Joined: Oct 2006
Posts: 60
Member
|
|
Member
Joined: Oct 2006
Posts: 60 |
I'm having trouble connecting to the LAN port on the card using the VMI editor software on any PC running Win7.
WinXP machines are not having this issue. I made all necessary firewall exceptions and tried running in WinXP compatibility mode with no luck.
has anyone else run across this issue ?
thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,810 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,810 Likes: 15 |
Never had a problem, but try using a cross-over cable. Some NIC cards aren't auto-sensing.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Feb 2014
Posts: 32
Member
|
|
Member
Joined: Feb 2014
Posts: 32 |
We had a very similar problem at our office where 1 pc could connect but all others would not. Per ICON it is a PC problem and here are the steps to fix it...
Computer Management -> Device Manager -> Network adapters -> then select properties of the installed adapter -> advanced tab
"UDP Checksum Offload (IPV4)" Set the value = "Disabled" and click "OK".
If you can't change it on the NIC, you will need to google the Windows registry change to fix it or use a serial connection.
|
|
|
|
|
Joined: Oct 2006
Posts: 60
Member
|
|
Member
Joined: Oct 2006
Posts: 60 |
thanks RegisMT that did the trick !
|
|
|
|
Forums84
Topics94,492
Posts639,865
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
