|
|
Joined: Feb 2018
Posts: 11
Member
|
|
Member
Joined: Feb 2018
Posts: 11 |
Does anybody know what size and amperage the teeny fuse is on a new style ACS 5 slot backplane, AND where I might find some?
|
|
|
|
|
Joined: Dec 2007
Posts: 6,834 Likes: 25
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,834 Likes: 25 |
15 amp fuse....assuming you are in the United States. Don't forget grounding to comply with Underwriters Laboratories (UL) 1459 As explained in the installation manual page 2-2 ACS Manual
|
|
|
|
|
Joined: Feb 2005
Posts: 12,354 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,354 Likes: 4 |
God, no. It's 4 amp and I'm looking at what I have which is Buss GDA-4A.
Now, be advised that that fuse doesn't blow by itself. It always means that one of the mods power supplies has crapped out. The way to find which one is to remove each module and plug a power cord directly into each one. Keep your face away because the offending one is going to blow up like a roman candle. Replace the module with a new one and replace the fuse.
And I haven't grounded a Partner system since I had processors destroyed because of a voltage difference between wherever you connect the ground and the receptacle ground. Both the green ground on the line cord and the ground screw are connected together internally via a circuit board trace that will burn up like a fuse if there is any current through it. So, if you are going to use the ground screw it MUST be connected to the receptacle ground that the system is plugged into- if you can find something that brings that ground out at the receptacle. As far as I'm concerned the grounded line cord works just fine by itself.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
Buy extra fuses and add modules to the carrier one-by-one until you blow it again. Toss the bad module and replace the fuse one more time. No fire in your face that way
|
|
|
|
|
Joined: Feb 2005
Posts: 12,354 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,354 Likes: 4 |
Awww, that's no fun. And why waste fuses? Besides, my way is a lot quicker.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: May 2002
Posts: 4,309 Likes: 8
Moderator-Avaya, Polycom
|
|
Moderator-Avaya, Polycom
Joined: May 2002
Posts: 4,309 Likes: 8 |
Use a penny , works fine. Just don't hang around to long,.
|
|
|
|
|
Joined: Dec 2007
Posts: 6,834 Likes: 25
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,834 Likes: 25 |
Two pennies...that's my 2¢ worth.
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Taddeo, justbill),
155
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
