web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#618346 03/29/18 06:34 PM
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
I have an odd one. 7400 running 4.98 with an svmi20i.

Full auto attendant. When calling in and hitting 0 it transfers to the reception station group 5101, all the caller hears is dead air then eventually it goes to the general mailbox. When dialing 5101 from the AA, same result. When dialing an actual extension, then the caller hears ringing.

I’ve checked the supervision levels and everything looks good. Not sure where to look past that. Tried comparing it with known working system and with my own lab system and can't duplicate it here.

Any help would be fantastic!

Cheers,

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Sounds like either transfer moh is turned off, or the moh isn't working

Joined: Dec 2007
Posts: 6,799
Likes: 18
Retired Admin
*****
Online Thinking
Retired Admin
*****
Joined: Dec 2007
Posts: 6,799
Likes: 18
Make sure the MOH cord that's plugged into the MIS is Mono and not Stereo.


Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby
https://www.facebook.com/Dean-Wilson-Photography-112841337020414

Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."
Joined: Jan 2018
Posts: 218
Member
Offline
Member
Joined: Jan 2018
Posts: 218
clip your buttset to the moh cord connector and if you hear music then input is good you could also have someone put you on hold . If you hear music follow what nameless stated . if it was a stero plug it should have 2 leads , one left and one right input . Nameless is the pro as far as samsung on this forum .


Ground is Ground the world around !
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
It is only an issue for calls going through voicemail. Ext- ext transfers are fine and standard hold work fine.

-W

Joined: Dec 2010
Posts: 681
Member
*****
Offline
Member
*****
Joined: Dec 2010
Posts: 681
Look for trasnfer ringback moh and turn it to on in mmc 210.

Also make sure you have the moh ports programmed for the vm ports as well.

Last edited by Biztel Cuban Okie Tech; 04/10/18 02:46 PM.
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
Okie to the rescue again!

I don't quite understand how enabling the transfer ring back MOH would let the caller now hear the ringing, but it does.....

Thank you my friend!

Joined: Dec 2007
Posts: 6,799
Likes: 18
Retired Admin
*****
Online Thinking
Retired Admin
*****
Joined: Dec 2007
Posts: 6,799
Likes: 18

MMC: 210 | 06 TRANSFER MOH:OFF


When this option is turned ON outside parties will hear trunk MOH
instead of ringback tone from the time a transfer is completed until
the call is answered by an internal party. System default is OFF.


If you think this through you will see why OFF is default.
If the setting were reversed and the system didn't have a MOH source,
then the caller would hear SILENCE and probably hang-up call




Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby
https://www.facebook.com/Dean-Wilson-Photography-112841337020414

Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."
Joined: Aug 2011
Posts: 344
Member
OP Offline
Member
Joined: Aug 2011
Posts: 344
Ah, yes. that does makes sense, and also explains an issue I've had on systems that have had the MOH die and complain of the silence.

Thanks!!!


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5