web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Aug 2003
Posts: 268
Mickamg Offline OP
Member
OP Offline
Member
Joined: Aug 2003
Posts: 268
I have a customer with the complaint that calls coming into the MICS and then transferred (off-premise) to the lead number of a CICS down the street experience static and otherwise poor quality. This is a new issue, so I visited each site to check it out. All the POTS lines sound good when placing regular calls from each site. The call transfer will typically grab line 7 to make the second call to the remote CICS, so I checked that line quite thoroughly, but found nothing suspect. Here is my question: Where does the bridging of the two calls take place? Am I looking at an issue with the line cards, or is this on the backplane of the MICS?

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
MICS site
Since they have two line cards I would have swapped them.
Also you can try taking line 7 out of the pool if still an issue.

If you narrow it down to a line then swap jumpers with another line. ie swap line 7 with 4.

You should be using Global Clid cards.


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada




Joined: Apr 2005
Posts: 2,498
Likes: 2
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,498
Likes: 2
This is off topic but.
Does their telco have the option of transfer disconnect on the lines? If they do I would recommend it.


We get old too soon, smart too late
Joined: Aug 2003
Posts: 268
Mickamg Offline OP
Member
OP Offline
Member
Joined: Aug 2003
Posts: 268
So you would recommend swapping the cards even though placing calls out directly on those lines (line 7 in particular) work fine and do not exhibit the static issues?

Dan, by transfer disconnect are you referring to something similar to the FLASH, dial the second number, and release to the second party (i.e. using the telco switch to host the transfer)?

Joined: Apr 2005
Posts: 2,498
Likes: 2
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,498
Likes: 2
Mickamg,

Yes, Nortel uses the feature link as the flash.
We had several customer in the past use it, it worked great.


We get old too soon, smart too late
Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
Originally Posted by Mickamg
So you would recommend swapping the cards even though placing calls out directly on those lines (line 7 in particular) work fine and do not exhibit the static issues?


Sorry I do not know how to answer this so I will just bow out, but good luck!


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada





Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,113 Shoretel
187,717 CTX100 install
186,810 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
Who's Online Now
1 members (JBean3329), 50 guests, and 422 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5