web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#631897 08/15/19 05:13 PM
Joined: Aug 2006
Posts: 287
KX-T308 Offline OP
Member
OP Offline
Member
Joined: Aug 2006
Posts: 287
Hi peeps

I have a 7100 running 4.46e (MP10) with 2 SIP trunks, 2 MGI's and 1 3rd Party SIP Extension.

The Yealink W52P is registered to the system, however the phone will only dial a single digit (0 for operator) and "480" everything else.

Also if I dial the SIP Extension I get No MGI Channels Available even though no MGI channels are being used.

Other than upgrading the MP10 to MP10a does anybody have any other ideas that I can try.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Check mmc615 to make sure all your mgi channels are in all columns.

A mgi channel is required to talk from a non-ip (digital, or slt phone. Isdn or pstn trunks) to an ip device (ip phone, sip phone, sip trunk, h323 trunk).
Vm and moh also require a mgi channel.

What handset type are you getting to call the sip phone from?

Have you configured the dial plan on the sip phone to match your numbering plan, etc?

Make sure mps is enabled so the sip phone can use a sip trunk without using a mgi channel.

Joined: Aug 2006
Posts: 287
KX-T308 Offline OP
Member
OP Offline
Member
Joined: Aug 2006
Posts: 287
I have checked all of the above and it still does not work.

However I uploaded the config to a test system (same software level & set urgent licence to on) and I dont have any issues. The SIP extension makes & receives calls.

Will factory default the processor and upload the config again to check

Joined: Aug 2006
Posts: 287
KX-T308 Offline OP
Member
OP Offline
Member
Joined: Aug 2006
Posts: 287
It turned out to be that the system was on a different subnet to the phone which stopped it from working correctly. Not sure why this was.


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
1 members (Curlycord), 77 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5