web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Aug 2018
Posts: 4
WayneP Offline OP
Member
OP Offline
Member
Joined: Aug 2018
Posts: 4
ESI-600, 3 PRI's, outbound calls set to use the 3rd PRI, top channels on down, inbound calls use the 1st PRI, lowest channel on up.

User reported that they had called from their office phone and the recipient noticed that the CID was not correct for the caller, it was another one of our numbers.

Had our ESI support person double check the settings. He went into F31, no issues, Checked the PRI in F16, no issues, and the caller ID in F24, were correct.

I was able to replicate this issue by dialing out from two phones using theFlash/rdl so the calls occurred almost simultaneously. This results in one of the CID's appearing on both receiving phones, though the calls are otherwise completing correctly. Tried to replicate it by manually dialing the numbers on the two phones, but could not get the issue to recur, closest I got was dialing all but the last two numbers manually on one phone, then flash/rdl on the other, and then quickly completing the first call.

I contacted our vendor, they set up a trap on the circuits and I recreated the issue. According to them, they are just passing the caller ID information we send them.

I can also replicate this by using a speed dial button.

I tried to isolate it to a particular PRI, but if I set up a CO line for a particular PRI, I can't use a speed dial or flash/redl. By using a CO line on one phone, manually dialing one number and flash/rdl on the other before completing the first, I can replicate with a CO for the 3rd PRI (which is what our outbound calls normally use), but if I use a CO line set up on the 2nd or first PRI, I can't replicate the issue.

I've looked through the forums, didn't see anything that appeared to be similar. Any input would be appreciated.


Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Aug 2006
Posts: 1,795
Likes: 10
Moderator-Iwatsu
*****
Online Happy
Moderator-Iwatsu
*****
Joined: Aug 2006
Posts: 1,795
Likes: 10
Caller ID, as delivered to the callee, is the responsibility of the callee's provider. All the providers basically upload their subscriber info to a data base that the other providers use to identify inbound calls. A provider working with old or corrupt data bases is pretty common. The person who's getting the wrong info should holler at their provider.


Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.

Moderated by  5years&counting, nonameyet 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,695
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,706 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
3 members (Curlycord, JBean3329, mongo5150), 107 guests, and 255 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5