Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
No Longer Ringing other Stations
#633053 09/30/19 06:48 PM
Joined: Sep 2019
Posts: 10
Member
OP Offline
Member
Joined: Sep 2019
Posts: 10
I have been trying to learn the Comdial Executech XE NO308 system. I reset the system to factory defaults and all seemed to be ok. When I rang in to the system, all phones rang and their LED's lit. Today, I configured Line 1 to appear on key A1 as a test. The default is key B1. Now that I have done this, the other stations no longer ring for an incoming call. I tried to reconfigure the line appearance back to B1 but it will not take the program change. Does this sound correct? My only choice now is to reset the system back to facotry defaults (not a big deal). Does anyone have any ideas on this one? Is there a way to clear the programming on a soft-key?

Thanks

Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
Re: No Longer Ringing other Stations
Joliet_tech #633056 09/30/19 07:38 PM
Joined: Jul 2006
Posts: 2,538
Moderator-Panasonic
***
Offline
Moderator-Panasonic
***
Joined: Jul 2006
Posts: 2,538
Well, by default stations 10,17 and 32 in the larger boxes ring. I would imagine that since you moved line 1 to a different button, It only rings on 10 because all lines ring on 10. You need to program ringing on any other phone if the line appears on it.

Decide where you want the line to be, program your lines, then program your ring assignments.

Carl


There's no place like 127.0.0.1
Re: No Longer Ringing other Stations
Carl Navarro #633061 10/01/19 11:44 AM
Joined: Sep 2019
Posts: 10
Member
OP Offline
Member
Joined: Sep 2019
Posts: 10
Thank you Carl. I did program a different button on Station 11 and it flashes but does not ring. You mention "program ringing" and "ring assignments", Is this the Flexible Rining Assignments parameter? What does GND mean? I don't understand what how to configure this parameter.
When I was in the default configuration, the 5 phones that I had connected did ring (I'm pretty sure).

Thank you very much.

Re: No Longer Ringing other Stations
Joliet_tech #633070 10/01/19 08:40 PM
Joined: Jul 2006
Posts: 2,538
Moderator-Panasonic
***
Offline
Moderator-Panasonic
***
Joined: Jul 2006
Posts: 2,538
I assume you have a manual. The only thing I can think of for GND is ground. About 30 pages in, the manual shows how to connect the cabinet to electrical and the GROUND lug. Don't be overly concerned) unless you plan on making this permanent.

I'm using the NO308 rev J or higher practice and it says that only 10 and 17 were programmed for all ring. It's program 50 and you should be able to dial 11, press lines A1, A2, etc, then # and dial 12, press lines A1, A2 until you're done. Finish with *

Carl



There's no place like 127.0.0.1
Re: No Longer Ringing other Stations
Joliet_tech #633082 10/02/19 12:36 PM
Joined: Sep 2019
Posts: 10
Member
OP Offline
Member
Joined: Sep 2019
Posts: 10
Thanks for the clarification on ring progamming.

I also figured out what GND is. I was misreading it, the word is AS'GND which I'm pretty sure means "assigned". They felt is necessary to use a very bad abbreviatiion (IMHO) instead of making a font smaller or a cell wider. Mystery solved.
Thanks again.


Link Copied to Clipboard
Most Recent 5 Post
test telephone number
by dude - 11/30/20 07:51 PM
DSU Serial Ports
by tylan - 11/30/20 07:21 PM
SVMi20i Error
by Bushmills - 11/30/20 07:00 PM
XTS database downloads crash
by EV607797 - 11/30/20 03:37 AM
9100 sip trunk
by juno - 11/28/20 09:51 PM
Who's Online Now
27 members (RRB, Daniel, 304Tech, cswroe, Yoda, teleco, vicbob, BobRobert, RM SYSTEMS, firefighter, MooreTel, metelcom, EV607797, Skunky, Greg Ercolano, Mercenary Roadie, nortelvoip, pvj, hbiss, brokeda, Coral Tech, justbill, Touch Tone Tommy, Bob3470, hitechcomm, Professor Shadow, Ben Holmes), 229 guests, and 59 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics94,091
Posts637,983
Members49,386
Most Online5,661
May 23rd, 2018
Today's Birthdays
David Gillish, jkdawsey, kitjr123, MP Telecom, stephen1905
Newest Members
drextech, d_chats, LukeS, RickToshibaCIX, Geochurchi
49386 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
ABLE1 11
Daniel 11
hbiss 9
dexman 6
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners