|
|
Joined: Nov 2019
Posts: 6
Member
|
|
Member
Joined: Nov 2019
Posts: 6 |
Anyone know how to setup a softphone with SL2100? The SL2100 doesn't have a VOIP daughter board, it comes out of the box with 8 VOIP ports. I have tried with NEC Desktop Suite in softphone mode but without any luck.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Probably needs a license. You can always turn on a demo license to verify this.
|
|
|
|
|
Joined: Nov 2019
Posts: 6
Member
|
|
Member
Joined: Nov 2019
Posts: 6 |
I don't think that i need a licence because the softphone is registering on SL2100 and run the Desktop Suite in trial mode for 90 days. I can see the mac address and the ip of the computer in the section 15-05 "IP Phone Basic Setup", but when I start the Desktop Suite, after 30 seconds(timeout) it says that cannot connect to the CTI server. I followed this tutorial https://midwesttechnology.uservoice...g-desktop-suite-on-the-nec-sl1100-in-sof and don't know if this is available for SL2100 too.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Well, there is a lot there to setup for voip to work. 2 internal Ip addresses, 5103 in licenses..etc. Setting up a user in the system. You might want to call tech support and have them walk you through everything; there is a lot is can be.
|
|
|
|
|
Joined: Nov 2019
Posts: 6
Member
|
|
Member
Joined: Nov 2019
Posts: 6 |
I already called the company who sold the SL2100, but they told me that we must buy the VOIP daughter board(SL2100 comes out of the box with 8 VOIP ports) and even that, they don't know how to setup the softphone and we must buy an IP Desktop Telephone.
|
|
|
|
|
Joined: Oct 2012
Posts: 252
Member
|
|
Member
Joined: Oct 2012
Posts: 252 |
Your programming sheet is incomplete as Coral stated - You should contact NTAC for support and the correct programming for an SL2100
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
There are differences between the SL2100 here in the North America and the ones sold in Europe. Here in the US the VoIP daughter board is not needed until you need more than 8 IP resources.
Additional problem, you are a end user, unless you get a tech ID from NEC you will not be able to receive tech support.
We get old too soon, smart too late
|
|
|
|
|
Joined: Nov 2019
Posts: 6
Member
|
|
Member
Joined: Nov 2019
Posts: 6 |
You are right, we don't have a tech ID from NEC and I don't know how to get one. I have tried to solve the problem sniffing the network with wireshark. I saw that when softphone request to register the response from the SL2100 is "401 Unauthorized", but don't have any clue how to solve this.
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
|
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Ya having the tech ID will get you tech support on this particular system.
|
|
|
|
Forums84
Topics94,491
Posts639,864
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
304
guests, and
184
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
