|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
How do I connect to the Samsung DCS 100 with a computer and what software do I use? Do I use a DB-9 cable etc..?
How do I manually back up the system?
Thanks Bill
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Depends on what card you have.If it's a Mem3 or 4 card (release 1)then you connect with a serial cable using pcmmc. If it's a MCP card (release 2) then you use ethernet and OSM software. The software to use depends on what type of card you have and what software version the system is running.
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
How do I find out in programming or have to look at the hardware?
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
In programming from a keyset look at mmc 727 for the system version. You can look at the hardware to tell what card you have but you won't be able to tell the version .
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
Version 2004.05.12 B1.34
Also after a call is hung up with the CO trunks it takes like 5 seconds to disconnect and the light to go out on the phone. How do I change the disconnect timer?
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
So you have a MEM3 or 4 card , release1 .That means you need a misc card installed and you would connect to a serial port .Sorry, you can use OSM (Office Serv Manager) to program it. This should help you https://archive.org/details/ariscop_gmail_OsmThe co port hangs onto the line to make sure it disconnects properly.default is 2 seconds and you can adjust it in mmc503 (clearing)
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
So thats a different card then the VM card where I see a hard drive and a serial port?
Thanks for all your help... Im a AVAYA and CIsco guy and this Samsumg PBX is kicking me ass... LOL
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Correct.The serial port on the SVMi card is only for programming the voicemail/ auto attendant .For that you can use hyperterminal .
To do the phone system you need a MISC card which is used for caller id decoding as well and would be sitting to the left of the MEM card.
|
|
|
|
Joined: Dec 2011
Posts: 28
Member
|
OP
Member
Joined: Dec 2011
Posts: 28 |
Thanks PVJ your awesome.... 1 last question I hope lol.... The memory card has a dip switch setting on it, should it be in the up or down position to save all the translations?
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
The switch should be marked ON and OFF .You want it in the ON position to hold the programming.I'm not sure I think it is up but take a look at the screening on the card itself.
|
|
|
Forums84
Topics94,282
Posts638,762
Members49,764
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
84
guests, and
132
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|