|
|
Joined: Sep 2019
Posts: 7
Member
|
OP
Member
Joined: Sep 2019
Posts: 7 |
Looking for a downloadable manual that I can use to program the FXII from the phone itself. I know I can use VMMI, but for this location, phone programming is just easier and it is different than the J1632 we are used to using.
Any insight is great. I paid the 20 bucks for the tech support downloadable manuals but no luck there.
Russ
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Programming from the phone on the FXII was limited to Operator procedures and basic items like Time and Date, Night service ,etc. No real system level programming.
|
|
|
|
Joined: Sep 2019
Posts: 7
Member
|
OP
Member
Joined: Sep 2019
Posts: 7 |
Ok, thanks for clarifying for me. I will use VMMI.
|
|
|
|
Joined: Sep 2019
Posts: 7
Member
|
OP
Member
Joined: Sep 2019
Posts: 7 |
Back to this topic. We are in the process of programming this system. All features working, except we are getting Line Unavailable for lines 1 - 4. We are using the FXCMw-16 board. Are we missing a step?
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Verify the amp cable is seated firmly on the card. Also check to see if the lines are allowed in the COS programming. Hopefully you did a master clear mode 3 to wipe out all previous data.
|
|
|
|
Joined: Sep 2019
Posts: 7
Member
|
OP
Member
Joined: Sep 2019
Posts: 7 |
Can you provide some insight on how to program the class of service ?
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Each COS 1-32 have all allowed or denied options. Look under your class and then look at lines to allow or deny.
|
|
|
|
Joined: Mar 2018
Posts: 345 Likes: 1
Member
|
Member
Joined: Mar 2018
Posts: 345 Likes: 1 |
Make sure that there is actually something attached to lines 1-4. Also if there are multiple line cards (whether they be analog or SIP?? or PRI) be sure that you are using the correct ones as lines 1-4.
The Cloud is just someone else's computer!
|
|
|
|
Joined: Sep 2019
Posts: 7
Member
|
OP
Member
Joined: Sep 2019
Posts: 7 |
A master clear 3 resolved my issue. The load we had was bad and couldn't figure it out. Thanks for all the help
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
130
guests, and
176
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|