web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2005
Posts: 34
Fisher Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 34
Hello.

I have been trying for the longest time to get vonage(linksys adapter) to work on a network that does not have a DHCP server(or a firewall)

I basically just have a Data T1 going into the network and I have plugged the vonage box into it the network. There is no firewall and no DHCP server.

The internet light flashes but it will never get the phone line to turn on.

I have tried to manual set the IP address, subnet mask, gateway, DNS but still nothing.

Does anyone know if a DHCP server is a necessary to get the vonage to configure or is there any trick to this?

Any help would be appreciated.

Thanks.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Sep 2004
Posts: 4,194
Likes: 2
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 4,194
Likes: 2
Have you tried and call Vonage?

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
vonage also has a good site with online FAQS and forums

Ive found them helpfull


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Nov 2004
Posts: 524
Member
Offline
Member
Joined: Nov 2004
Posts: 524
NO DHCP (NAT) means you'll need a public IP for the ATA. Do you have this?


ElectSys Tech LLC
Hosted Phone Systems Solutions Provider
Allworx, Sangoma, FreePBX
Telephone & computer systems in the Jefferson City, Columbia MO area.
Joined: Aug 2003
Posts: 5,154
Likes: 2
Moderator-Vertical, Vodavi
*****
Offline
Moderator-Vertical, Vodavi
*****
Joined: Aug 2003
Posts: 5,154
Likes: 2
No firewall and no DHCP server? What? Are you sure? What kind of router?

Joined: Sep 2004
Posts: 1,436
Member
Offline
Member
Joined: Sep 2004
Posts: 1,436
You must have some kind of router or something to convert the T1 to ethernet. Most routers have a DHCP server built in. Even without DHCP, set the linksys for a static lan ip & gateway and it should work fine. Check one of the computers on the network to get the gateway and subnet, and ping some lan addresses to find one that's not being used.


Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
Joined: Apr 2005
Posts: 34
Fisher Offline OP
Member
OP Offline
Member
Joined: Apr 2005
Posts: 34
Hello.

Its actually an ADTRAN product that functions as both a Chanel bank and as a router. The T1 in use has flexible bandwidth between data and another VOIP product by the phone company.

Even when the VOIP product is 100% in use, there is always at least 1 Mbps available for data. I wonder if any of these factors might of been causing a conflict?

I should also point out that I did not enter the values while I was on the actual network that I'm trying to use.

I basically configured it from my a friend's house and then took it to the network location. Do you think it would of lost the settings without power for a day?

Thanks.

Joined: Aug 2003
Posts: 5,154
Likes: 2
Moderator-Vertical, Vodavi
*****
Offline
Moderator-Vertical, Vodavi
*****
Joined: Aug 2003
Posts: 5,154
Likes: 2
That's your problem. You have to set up the with the gateway/subnetmask/ip scheme of the location.

As Junkman said, get the ip address of one of the pc's. The easiest way to do this is type ipconfig from a command prompt. You'll see the gateway, ip address, subnet displayed. Come up with an IP address that is not being used and put it into the linksys.


Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
teleco 4
Who's Online Now
1 members (nonameyet), 110 guests, and 222 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5