|
Joined: Dec 2008
Posts: 86
Member
|
OP
Member
Joined: Dec 2008
Posts: 86 |
More questions about PRI's. Axxess V11 system, wanted to use the new feature to send out information on the location, calling party name and number, for 911. We worked with Intertel and they said it doesn't work, but the Tier 3 engineers mentioned 'call setup' and I saw this in the online help 'Primary Rate Call Type' the last line also mentions 'information sent out with the call setup'. Is there a 'timer' for the PRI's that may need to be increased to allow the passage of the 'calling party name and number' fields over those PRI's, because the PRI vendor says they are not blocking any information. I maybe grasping at straws, but I really want this new feature to work.
Say Bye.
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
Member
Joined: Sep 2005
Posts: 840 |
You will not get the name feature to work on a PSTN PRI circuit. The number should be simple. If the PRI is functioning normally on outbound calls and you have the Calling Party Number programmed on a station and outbound calls from that station show a different number, the provider is blocking CPN. That's it, there is no other reasonable explanation.
If someone from Inter-Tel told you that CPN 'doesn't work', they are incorrect. It does and has worked for years.
|
|
|
Forums84
Topics93,881
Posts637,008
Members49,673
|
Most Online5,661 May 23rd, 2018
|
|
1 members (BobRobert),
90
guests, and
21
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|