|
|
Joined: Oct 2015
Posts: 103 Likes: 3
Member
|
|
Member
Joined: Oct 2015
Posts: 103 Likes: 3 |
Is there a way to change the extension numbers assigned to the jacks of a 206E Module? It is a Avaya Partner ACS 206E R4.1.
The system is numbered Ext 10 through 23. Ext. 23 being the last sequential number. The he next module has written in felt tip pen Extensions 24, 25, 26, 27, 28, 29.
In the programming the assignments are actually:
Ext. 24 is Ext. 36
Ext. 25 is Ext. 37
Ext. 26 is Ext. 38
Ext. 27 is Ext. 39
Ext. 28 is Ext. 40
Ext. 29 is Ext. 41
I cannot find any information in the Installation/Programming manual concerning this, though at some time someone made these changes.
Thanks
"Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters
|
|
|
|
|
Joined: Feb 2005
Posts: 12,354 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,354 Likes: 4 |
You have the modules improperly installed in the carrier. Nobody made any ext # changes because it can't be done.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
Extension numbers are fixed, determined by the type of module, the slot it is installed in, and what other modules are installed in previous slots. Put your modules in this order: ![[Linked Image from i.imgur.com]](https://i.imgur.com/l5weEUX.jpg)
Last edited by Touch Tone Tommy; 08/19/20 12:09 PM.
|
|
|
|
|
Joined: Oct 2015
Posts: 103 Likes: 3
Member
|
|
Member
Joined: Oct 2015
Posts: 103 Likes: 3 |
Then someone must have moved the modules around at a time when a failed piece of hardware was replaced, etc. If only the telephone room could talk! This was how it was installed before I received it. It's also the same way I put it back together as it was shipped with the modules individually wrapped. ![[Linked Image from hammondorganservice.com]](http://www.hammondorganservice.com/downloads/images/IMG9080-1.jpg)
"Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters
|
|
|
|
|
Joined: Oct 2015
Posts: 103 Likes: 3
Member
|
|
Member
Joined: Oct 2015
Posts: 103 Likes: 3 |
When I looked at the chart which Mr. Touch Tone Tommy, it made much better sense.  I powered it off, changed the slots of modules #2 and #5 powered it back on and now all is right with the world. To image it was that way for at least a decade I think. A great deal of thanks for you help and patience. 
"Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters
|
|
|
|
|
Joined: Oct 2015
Posts: 103 Likes: 3
Member
|
|
Member
Joined: Oct 2015
Posts: 103 Likes: 3 |
On Page 2-11 of the R3 Installation manual I see the chart now "Labeling Jacks" I don't think that it would have dawned on me by look at the chart on this page, that Extensions would be laid out in one way only depending on the position of the modules. If I had found the section, and read it several times, then I might have grasped the concept....egads  Something learned and something gained.
"Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
342
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
