|
|
|
|
Joined: Apr 2009
Posts: 196
Member
|
|
Member
Joined: Apr 2009
Posts: 196 |
The reboot was done different ways.
First time just regular reboot. Shutdown from Manager.
2nd time shut down system, powered up just 30 port module, waited 2 minutes then powered up IP office V2
software is 9.0.3.0 build 941
Telesystems technician
|
|
|
|
|
Joined: Apr 2009
Posts: 196
Member
|
|
Member
Joined: Apr 2009
Posts: 196 |
I am not sure why my reply from hitechcomm's post above does not show up on my pc? I posted it yesterday?
I rebooted numerous ways, numerous times, including the proper way.
Powered up module, waited two minutes, then I .
restored power to IP 500 v2 after it was properly shutdown.
Also tried powering up after proper shutdown from manager.
Last edited by Telesystems; 05/07/22 12:49 PM. Reason: spacing
Telesystems technician
|
|
|
|
|
Joined: Dec 2021
Posts: 6
Member
|
|
Member
Joined: Dec 2021
Posts: 6 |
Have you tried changing the expansion port it is connected to? I have seen the expansion ports die in the past.
|
|
|
|
|
Joined: Apr 2009
Posts: 196
Member
|
|
Member
Joined: Apr 2009
Posts: 196 |
Yes I tried all expansion ports, bought different 30 port module no dif france!
Telesystems technician
|
|
|
|
Forums84
Topics94,529
Posts640,030
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, Skunky),
466
guests, and
48
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
