|
|
|
|
Joined: Feb 2006
Posts: 54
Member
|
OP
Member
Joined: Feb 2006
Posts: 54 |
I have an 11.0 Axxess system with 4 loop start lines. I would like to redirect certian incoming calls using caller ID to certian extensions. Can it be done? :toast:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
You can do it with a PRI but I've never tried it with loop start trunks.
With a PRI, you aim the CO Trunk Group at one of the unsused Call Routing Tables in Day and Night. Then you change the Call Routing Key to Outside Party Number instead of Trunk Number for that Call Routing Table. Put the pattern of the incoming Caller ID that you want to route in the table and aim it accordingly.
I'm not sure that it would work but I'm assuming you would need to change the Service Type to Caller ID on your loop start trunks as well.
Try it out and let us know what you find.
|
|
|
|
|
Joined: Feb 2006
Posts: 54
Member
|
|
OP
Member
Joined: Feb 2006
Posts: 54 |
You rock.....It works. I new that there was a way of doing this. You also have to add a + entry on the next line for all other calls.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (phonman123),
143
guests, and
439
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
