|
|
|
|
Joined: Oct 2011
Posts: 6
Member
|
|
Member
Joined: Oct 2011
Posts: 6 |
HOW CAN I GET SMDR THRU PHONE OR ANOTH SERIAL OUTPUT. OR HOW DO I GET SMDR OUT THRU NETWORK
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
You can get it through the network. You must enable SMDR under Sockets in DB Programming. You can capture it via Diagnostic Monitor which should have loaded when you loaded the Session Manager, unless of course you need it for another call accounting software or the like.
|
|
|
|
|
Joined: Oct 2011
Posts: 6
Member
|
|
Member
Joined: Oct 2011
Posts: 6 |
We are useing Equitrac to send the smdr to. Is the session manager you are talking about the new call center suits. If so we are not useing that. We are sending raw smdr to Equitrac.
|
|
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
You must have access to the phone system programming to ensure that SMDR is enabled. It is not by default. This is a proprietary software called Session Manager in some versions. Since you are using an HX5000 you may be using a more recent software called Mitel System and Diagnostics Programming. If you do not have this software, you will need to get it from your vendor.
I am unfamiliar with Equitrac but I'm sure you would just put in the IP address of the phone system when asked where it will be receiving its SMDR data at that point.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
251
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
