web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#91256 09/08/08 06:45 AM
Joined: Apr 2008
Posts: 11
PucPuc Offline OP
Member
OP Offline
Member
Joined: Apr 2008
Posts: 11
Can anyone tell me about the visual indications I should get on a 100 DCD? I can't dial in or out and have no indication (lights) on the card. The card has been replaced the carrier did come onsite and tested the circuit and found no problem. I ran test and looked at the status and it does have errors.It has been several years since I have worked on this system and could use a few trouble shooting pointers. Thank You :bang:


PucPuc
Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

#91257 09/08/08 07:13 AM
Joined: Apr 2008
Posts: 11
PucPuc Offline OP
Member
OP Offline
Member
Joined: Apr 2008
Posts: 11
The switch has been in place with current config for several years.


PucPuc
#91258 09/08/08 07:48 AM
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
Offline
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630
sounds like the B-channels aren't released. If the D-Channel wasn't working, a red light would be on. Have the carrier check the b-channels.


Z-man
Avaya SME Authorized Partner
www.omniofficetech.com
#91259 09/08/08 07:58 AM
Joined: Apr 2008
Posts: 11
PucPuc Offline OP
Member
OP Offline
Member
Joined: Apr 2008
Posts: 11
Carrier was onsite Friday and said circuit "Tested Clean"


PucPuc
#91260 09/08/08 09:18 AM
Joined: Apr 2008
Posts: 11
PucPuc Offline OP
Member
OP Offline
Member
Joined: Apr 2008
Posts: 11
The carrier had changed provisioning on the circuit..... I had to step through the parameters I need before thay finally found their issue. Thank you for your reply.


PucPuc
#91261 09/08/08 02:59 PM
Joined: Jan 2004
Posts: 515
RIP Moderator
Offline
RIP Moderator
Joined: Jan 2004
Posts: 515
Rule NUMBER 1 - They all lie......


RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -
#91262 09/09/08 05:37 PM
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
There is no indication unless incoming or outgoing calls are made. Amber light indicates a proper configuration. Check a status in Maintenance. All alarms should be off. If an outgoing call is a PRI choice you will see top amber light after dialing which is indicates that your T1 trying to make outgoing call. If doesn't go make sure yours protocols and Provider's are exact match.

#91263 09/10/08 02:34 AM
Joined: Jan 2004
Posts: 515
RIP Moderator
Offline
RIP Moderator
Joined: Jan 2004
Posts: 515
Well, to provide a bit more clarification;

The DS1 Module actually has three LED's.

RED - It lights up when there are errors on the card and/or it does not like the way the T1 circuit is set up. If removing the errors from the Maintenance/System/Error Log clears the RED LED, then that's a good thing. If it fails to, or it comes back on, that's a bad thing.

AMBER - This is the "IN USE" indicator. When lit, a call is in progress on the Module.

GREEN - This only lights when the module is reset or the system is restarted. I really don't think it has any purpose, other than making the LED Bank look like a traffic light.

If the RED LED is out, but you can't access the PRI, there is something wrong with the set up SOMEWHERE. Could be the LEGEND/MAGIX, could be the PROVIDER.

Of course, all Modules have a RED, AMBER & GREEN status indicator, just not all have any physical LED's.


RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,097 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
1 members (Curlycord), 86 guests, and 248 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5