sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems outbound caller ID

lets just start with i'm new to IPO but know many other systems. i need to make a change that i thought would be easy but can't seen to find. i want to change the out bound CID per station to send their DID instead of the main number. we are running a PRI.
thank you for the help

First thing you may want to check is to make sure that the service provider in the area in question will allow you to do this.
A lot of them will not.

What release? Newer releases will have the programming in the ARS table. Older will have it in the Short codes section.

Bottom line is that, in your dial shortcode telephone number you can add s (or si) plus the number you want to send. For example, the telephone number may look like Nsi301447E which would send 301-447 plus user's extension number (assuming extension matches DID).
Good luck. Mike

thanks guys that worked,
one more quick question. now when i dial 8 i dont get return dial tone but can dial out as normal. if i take out the shortcode i dial 8 and get return dial tone
oh the norcal profile is mine too that is toast

Dial tone is a part of ARS form (assuming you're on R4 or higher)
Mike