|
Joined: Feb 2008
Posts: 22
Member
|
Member
Joined: Feb 2008
Posts: 22 |
Inherited a customer with an older Definity switch. G3-V9.0. They are interested in adding audix. Can this still be done? Also, do I need to verify if any features need to be activated? Never installed an Audix. Just did MAC's. Any and all info. would be greatly appreciated. There looking to have 100 +/- mboxes. An equipment list would also be most helpful.
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Sure...An Audix can still be added to this switch with no problem, depending on what type of integration you end up with would be the determining factor on feature activation of switch i.e: mode code or you could go dciu or clan..You can pick up a Maap 5,40 or LX pretty reasonable these day's.
...bob...
Bob Wells WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
Joined: Apr 2004
Posts: 207
Chris Howard
|
Chris Howard
Joined: Apr 2004
Posts: 207 |
Stay away from the Intuity Audix LX its a pain to deal with if you every need repairs. As for a Map5P with the 5.1.56 Software load, Great unit Easy to get repaired if ever needed. For Clan Integration, You will need a TN-799 Clan card in the switch and in your switch do (display system Maintenance) Page-two, your looking to see if (Packet inf2 = Y). For ModeCode, In your switch do (display sys cust option) about page 2 or 3 your looking for the line (mode code Interface) needs to be (Y). Call me if you have questions. Chris Howard 303-593-1763
William C. Howard
|
|
|
|
Joined: Jan 2007
Posts: 1,951 Likes: 2
RIP
|
RIP
Joined: Jan 2007
Posts: 1,951 Likes: 2 |
Got two AUDIX units--one brand spanking new in the plastic and another with some field trial on a G3. Just say the word and either box is yours man. Let's make this thing happen.
Both Bob (Wellco) and William Howard can testify for me.
"Press play and record at the same time" -- Tim Alberstein
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
You might be better served buying that is pre-configured. I am sure Dagwood or Chris would help you out with that. The can be kind of a pain if you don't know what your doing, or as in my case, suffer from CRS when it comes to Audix.
|
|
|
|
Joined: Feb 2008
Posts: 22
Member
|
Member
Joined: Feb 2008
Posts: 22 |
Mode code for centralized v.mail in "customer options" is set to no. Is this going to be an issue?
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Only if you choose to use an Audix with "mode code" integration...there are other way's to integrate. Should not be a problem. You still have DCIU and Clan available..did you check page 2 of Sys Maint to see if Packet inf2=y ? that is for Clan integration...
...bob...
Bob Wells WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
Joined: Feb 2008
Posts: 22
Member
|
Member
Joined: Feb 2008
Posts: 22 |
|
|
|
|
Joined: Apr 2004
Posts: 207
Chris Howard
|
Chris Howard
Joined: Apr 2004
Posts: 207 |
Is the switch a Prologic hanging on the wall or is the switch setting on the floor. If its a Prologic, your only option would be ModeCode or Clan. if its an XE cabinet then you can use DCIU, Clan, or ModeCode Integration. The Mode code for centralized voicemail can be changed to Yes if you want to use ModeCode.
William C. Howard
|
|
|
|
Joined: Apr 2004
Posts: 207
Chris Howard
|
Chris Howard
Joined: Apr 2004
Posts: 207 |
Fony1 Per your response about Packet inf2 = Y the best Integration would be Clan.
William C. Howard
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
204
guests, and
40
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|