|
|
|
|
Joined: Apr 2004
Posts: 1
Member
|
|
Member
Joined: Apr 2004
Posts: 1 |
I am one of the technicians who maintain a Mitel SX2000 Light using Lightware 28 and Procomm as Programming tool. I am wondering if it is possible to set the PABX to be called by from a mobile phone (with known ID - number), to hang up my call, to call me back and then to give me tone in order to make a call to other destination.
So far I made that anybody can call me on a local number while the Mitel forward the call to my cell phone. So my issue is if SX2000 light is able to do no cost calls for me while I am using the cell phone.
Thnk you very much for all your support!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 89
Member
|
|
Member
Joined: Mar 2001
Posts: 89 |
As far a I know all you can do is set up a disa trunk, but you have to call in on that trunk and it would give you switch tone so you could access features as if you were on site.
|
|
|
|
|
Joined: Oct 2003
Posts: 48
Member
|
|
Member
Joined: Oct 2003
Posts: 48 |
The 2k doesn't have the ability to accept your call, drop you and then call you back. You'd need a third party application for that. I think a one time Xiox used to make such a product.
Regarding DISA, pretty dangerous. You're asking to get hacked. Then you'll loose much more than any potential savings you may have had. I'd suggest calling cards.
Dry Aquaman.
|
|
|
|
Forums84
Topics94,515
Posts639,963
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Carl Navarro),
152
guests, and
51
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
