Norstar T-1 config

Print Thread

Rate Thread

Norstar T-1 config #122004 09/23/04 08:53 AM
Joined: Jul 2001 Posts: 1,985 Chetco Effect DrPbx Moderator-Mitel, NEC, Vodavi
DrPbx Moderator-Mitel, NEC, Vodavi Joined: Jul 2001 Posts: 1,985 Chetco Effect	I've been asked to add a T-1 to an MICS v6.1. Is ESF-B8ZS w/wink the config I am looking for. Also are there any conflicting numbers I should worry about on incoming DID's or can I convert any incoming number. Are there any other things I should watch out for? Thanks in advanced. ------------------ Bound to cover, Just a little more ground.

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Norstar T-1 config #122005 09/23/04 09:38 AM
Joined: Feb 2004 Posts: 454 Nationwide HtownDan Member
HtownDan Member Joined: Feb 2004 Posts: 454 Nationwide	you're good with that setup. if you need help email me. your station numbers don't even have to match your did's. you set your target lines to accept the did and route to whatever extension. multiple extensions can receive multiple did's. actually pretty nice.

Re: Norstar T-1 config #122006 09/24/04 08:33 AM
Joined: Jul 2001 Posts: 1,985 Chetco Effect DrPbx Moderator-Mitel, NEC, Vodavi
DrPbx Moderator-Mitel, NEC, Vodavi Joined: Jul 2001 Posts: 1,985 Chetco Effect	Thanks for the support. Incomming DID to multiple staions is a nice feature, I usually have to setup a virtual & place it on different stations. GOOOOOOOO Nortel! ------------------ Bound to cover, Just a little more ground.

Re: Norstar T-1 config #122007 10/17/04 06:02 AM
Joined: Jul 2001 Posts: 1,985 Chetco Effect DrPbx Moderator-Mitel, NEC, Vodavi
DrPbx Moderator-Mitel, NEC, Vodavi Joined: Jul 2001 Posts: 1,985 Chetco Effect	I know I have to program the target lines, but do they have to appear on the phone? Or will they ring to the ICM button. ------------------ Bound to cover, just a little more ground.

Re: Norstar T-1 config #122008 10/17/04 09:40 AM
Joined: Aug 2003 Posts: 5,155 Likes: 5 Gainesville, FL, USA nfcphoneman Moderator-Vertical, Vodavi
nfcphoneman Moderator-Vertical, Vodavi Joined: Aug 2003 Posts: 5,155 Likes: 5 Gainesville, FL, USA	Target lines can be programmed to ring only, appear & ring, or appear only. Whatever you want! ------------------ North Florida Communications Gainesville Telephone Systems Jacksonville Telephone Systems

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Norstar T-1 config