Hunt Groups

Print Thread

Rate Thread

Hunt Groups #123494 05/10/05 05:14 AM
Joined: May 2005 Posts: 6 San Jose, CA, USA dmice Member
dmice Member Joined: May 2005 Posts: 6 San Jose, CA, USA	Hello, I have a question about Hunt Groups. I am using ICS 4.0. I am able to program hunt groups and am able to use them, but when I do, my programming for buttons b01, b02... changes to the hunt groups that I program. Is there a way around this? I would like to have b01 to be DND and if the Hunt group has to be assigned to a button, have it assigned to a different button. Any advice is appreciated. Thanks

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Hunt Groups #123495 05/10/05 08:12 AM
Joined: Jan 2005 Posts: 826 Omaha, Nebraska, USA BCMguy.com Member
BCMguy.com Member Joined: Jan 2005 Posts: 826 Omaha, Nebraska, USA	You have the hunt group configured to appear&ring on the set. Change it to "ring only", and you'll get what you want. Good Luck! ------------------ BCM Guy www.BCMguy.com Learn more about the Nortel Networks Business Communications Manager HERE ! Marty Beutler Follow me on my quest to webify all of us at Webify.Us --> Providing Business Relevance for Web 2.0 Technologies

Re: Hunt Groups #123496 05/12/05 03:42 AM
Joined: May 2005 Posts: 6 San Jose, CA, USA dmice Member
dmice Member Joined: May 2005 Posts: 6 San Jose, CA, USA	Thank you, but I don't see that option. Where might I find that option?

Re: Hunt Groups #123497 05/13/05 02:24 AM
Joined: Oct 2003 Posts: 694 Washington emmitt2727 Member
emmitt2727 Member Joined: Oct 2003 Posts: 694 Washington	YOU HAVE TO GO INTO THE HUNT GROUP, AND THEN LIST THE MEMBERS OF THE GROUP. PRESS THE ENTER KEY TO VIEW EACH MEMBER AND IT SHOULD SAY APPEAR & RING AND THE KEY RIGHT BELOW IT IN THE WINDOW SHOULD SAY CHANGE. PRESS THAT UNTIL IT SAYS RING ONLY. HOPE THIS HELPS Shawn Connect Telecom www.connecttelecom.us In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson

Re: Hunt Groups #123498 05/13/05 03:07 AM
Joined: May 2005 Posts: 6 San Jose, CA, USA dmice Member
dmice Member Joined: May 2005 Posts: 6 San Jose, CA, USA	Thank you so much. I finally got it to work with the wonderful advice provided. Thanks again. This forum's helps beats the poorly written manuals any day.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Hunt Groups