|
|
|
|
Joined: Jan 2010
Posts: 5
Member
|
|
Member
Joined: Jan 2010
Posts: 5 |
I am working with a customer that is having a problem with their Norstar Plus MICS system. When they dial their internal extensions like 4xxx there is no issue, or dial 717/434-4144 there is no issue; but when they connect to an IVR system and enter the digit 4 it is not recognized -- it shows on the phone display. I have checked all configurations and can find nothing that would make only the number 4 be affected.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
|
Member
Joined: Feb 2005
Posts: 1,615 |
Never heard of this, assuming all sets on system.
Hard to say if software glich or not, doing a startup and re-program clears most gliches.
Assume you rebooted system?
Starnge it works to dial out but not when connected.
Unless of course your lines are set to Pulse and not Tones....you did check that right?
|
|
|
|
|
Joined: Jan 2010
Posts: 5
Member
|
|
Member
Joined: Jan 2010
Posts: 5 |
Yes did reboot.
Yes did check lines -- all set to tone.
Problem only exists with number 4 when in an IVR system -- I agree it is real weird, but I have seen it.
|
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
|
Member
Joined: Feb 2005
Posts: 1,615 |
What about when you call into a voice mail system instead of IVR?
If your site as AA then call in and test.
Make sure to call a few different sites in case its them and not your site.
Try also going online at Demarc with a butt set and see if you hear the 4 being pressed.
|
|
|
|
|
Joined: Jan 2010
Posts: 5
Member
|
|
Member
Joined: Jan 2010
Posts: 5 |
Have tried 3 different IVRs and followed with cell phone call to them (verifying that 4 works in IVR).
Problem exists on all phones at site (20).
Have not tried butt set at Demarc yet.
|
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
what release of software.
|
|
|
|
|
Joined: Jan 2010
Posts: 5
Member
|
|
Member
Joined: Jan 2010
Posts: 5 |
|
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
i guess i would monitor the copper trunk to verify a DTMF tone was being generated..also try at demarc with but set and verify its the switch or far end issue... also try a f808 for long tones to see if that clears it up.
Also kinda leaning towards far end since telco seems to be able to recognize 4's dtmf
|
|
|
|
Forums84
Topics94,527
Posts640,019
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
210
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from telcopc.ca]](https://telcopc.ca/files/pics/small-logo-sig.png){kind=logo}