|
|
Joined: May 2004
Posts: 9
Member
|
OP
Member
Joined: May 2004
Posts: 9 |
The manual says that I need INPUT of 2KOhm impedance.(page500-13) I'd like to hook up an old boombox for the music source. I thought the speaker output on these was around 8Ohms so I have no clue how to hook this up. Would appreciate anyone's help and advice.
Can I just plug in where headphones go on the radio and punch those 2 wires down to pins 42 and 17 on the J1?
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Yes, just plug into headset jack & adjust volume.
|
|
|
|
|
Joined: May 2004
Posts: 9
Member
|
|
OP
Member
Joined: May 2004
Posts: 9 |
|
|
|
|
|
Joined: May 2004
Posts: 9
Member
|
|
OP
Member
Joined: May 2004
Posts: 9 |
The beat does not go on!
I punched down the wires from the radio to the block. I can put a test set on the pins and here the music.
I enabled MOH in programming.
I dial 8 but don't get any music. Also there is no music on hold.
What's up with this? did I not program something I should have?
TIA
|
|
|
|
|
Joined: May 2004
Posts: 9
Member
|
|
OP
Member
Joined: May 2004
Posts: 9 |
Nevermind! One wire on my punchdown was not making good contact.
|
|
|
|
Forums84
Topics93,883
Posts637,024
Members49,675
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
35
guests, and
14
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
