|
|
Joined: May 2004
Posts: 9
Member
|
OP
Member
Joined: May 2004
Posts: 9 |
The manual says that I need INPUT of 2KOhm impedance.(page500-13) I'd like to hook up an old boombox for the music source. I thought the speaker output on these was around 8Ohms so I have no clue how to hook this up. Would appreciate anyone's help and advice.
Can I just plug in where headphones go on the radio and punch those 2 wires down to pins 42 and 17 on the J1?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Yes, just plug into headset jack & adjust volume.
|
|
|
|
|
Joined: May 2004
Posts: 9
Member
|
|
OP
Member
Joined: May 2004
Posts: 9 |
|
|
|
|
|
Joined: May 2004
Posts: 9
Member
|
|
OP
Member
Joined: May 2004
Posts: 9 |
The beat does not go on!
I punched down the wires from the radio to the block. I can put a test set on the pins and here the music.
I enabled MOH in programming.
I dial 8 but don't get any music. Also there is no music on hold.
What's up with this? did I not program something I should have?
TIA
|
|
|
|
|
Joined: May 2004
Posts: 9
Member
|
|
OP
Member
Joined: May 2004
Posts: 9 |
Nevermind! One wire on my punchdown was not making good contact.
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, Carl Navarro),
114
guests, and
227
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
