|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
OP
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Should this configuration work? I'm thinking I'm exceeding avail timeslots. MPBE 3.5.1-2FE3 software
The new T1/Combo card I'm trying to add in slot 1-1 does not want to run. CSU show EQ LOS and cards in shelves 2 & 3 go haywire. I verified the card is good by putting it into another system. Checked programming ok. Adtran tested ok. Its not wiring, etc.
Cabinet 0 0 DT24 1 DT24 2 DT24 3 PRIB 4 PRIB 5 LCI8
Cabinet 1 0 PRIB 1 PRIB (the new T1/PRI card thats not working) 2 DT24 3 DT24 3 DT24
Cabinet 2 0 DT24 1 DT24 2 DT24 3 SL12
Cabinet 3 0 DT24 1 DT24
I also tried the card in slot 1-6.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
From what I can see, you are going over 96 trunks in the first three cabinets 0-2 (104 trunks). You will need to place the new PRIB into cabinet 3 and you should be OK. It looks like you have plenty of room to do this without messing things up. Make sure to keep your clock cable consistent between the cabinets via the LMU2 connection to the first PRIB in cabinet 3.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
OP
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Ed thanks.
I was under the impression that a PRIB cannot be placed into Cabinet 3 and had to be in the first 'stack'.
Also are the clock cables required for a point-to-point PRI (networking)? Clock switch is off on the PRIB in hub and on in node.
With 4 PRIB and 1 LCOB8 this is right at 104 trunks.
|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
OP
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Manual says combined number of time slots for cab 1 and 2 cannot exceed 240. In this configuration, I'm at 204.
Isn't there a bank of 4 dipswitches on the card that need to be set if using as PRIB? I only set the T1/PRIB switch to PRI. I know I have run into this eq los on csu issue before, just can't recall the fix.
|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
OP
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Long day, but in the end I got it all working. Here is what I did wrong...
I forgot about setting the bank of 4 dipswitches to 1&2 On and 3&4 Off on the T1/PRI combo card when using as PRI.
The T1/PRI card worked fine in Cabinet 1 as currently poplulated. Had to set the LMU1 switch in Cabinet 0 to down position (PRI). Mandatory when installing T1/PRI combo in cabinet other than 0.
No clocking wires needed for Point-to-point. Just set Hub to clock off and Node to clock on.
When networking systems with a Telco point-to-point, the hub definately needs a T1 cross-over cable between it and the CSU/Telco. The node is straight-thru.
|
|
|
|
Joined: Oct 2004
Posts: 1,491
Member
|
Member
Joined: Oct 2004
Posts: 1,491 |
Glad to hear you got it working!!!
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|