web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#220261 07/12/11 03:55 AM
Joined: Jul 2011
Posts: 5
Fiske Offline OP
Member
OP Offline
Member
Joined: Jul 2011
Posts: 5
Have a customer with a Vodavi 3500-00. Line 2 will call out fine, works fine with rollover, but if line 2 is direct dialed caller gets one ring and a beep. Cannot pick up the call. Any ideas besides internal failure?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2005
Posts: 15,378
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,378
Likes: 13
That sounds line a telephone line condition that is referred to as 'ring trip'. Is there any abnormal noise on the line? I'd start by asking your telephone service provider to run a remote test on that line to see if they can see any issues with it first. Of course, you'll need to provide them with the physical number for that line in order for them to do this.


Ed Vaughn, MBSWWYPBX
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
first thing I would do is to check at the demark to see if it is a Telco issue or something inside

does that line happen to run though a alarm ?


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
Ditto the alarm question.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: Jul 2011
Posts: 5
Fiske Offline OP
Member
OP Offline
Member
Joined: Jul 2011
Posts: 5
Thanks for the responses. Yes that line does run from the phone block to a GE alarm system prior to entering the phone system.

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
pull it off the alarm then call and see what happens


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Jul 2011
Posts: 5
Fiske Offline OP
Member
OP Offline
Member
Joined: Jul 2011
Posts: 5
I was able to stop out today. Took security out of path, no change. Tested a good line on all co's, all co's working properly. Found even with line unhooked from building equipment at DMarc still having the problem, will contact phone company to test the line. Thanks for the help, Travis

Joined: Jul 2011
Posts: 4
Member
Offline
Member
Joined: Jul 2011
Posts: 4
I am having a simliar issue with my phone but rollover doesn't work either. I have 6 phone lines. All lines work fine except line 2. If someone calls on line two there is a half of a ring then right to VM. If someone calls on line one and it rolls to line 2 then half a ring and goes right to VM, can't pick it up. All other lines and rollover work fine. Have had the phone company test the lines and there is nothing wrong on their end (so they say). Have had several phone tech's out and they can't figure out the problem. The phone display onour main phone says "VM Alarm 6". Not sure if this has anything to do with it but we can't get that cleared out either. We can call out on line 2 just fine. Issue happened overnight about two weeks ago.

Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
Dial 656 to clear the vm alarm. Make sure line 2 is ringint to system vm not to Telco voice mail. Easy to check just hit 0 after it answers. If ringing to system vm then you need to check line programming for ringing assignment and or preset/fwd but my guess is that it is the ringing assignment. Also check to see if this problem changes when the system is in different modes: day/night/special.


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
In addition to checking the line 2 ring assignment, check the line's CO Preset forward timer too. But if line 2 has stutter dial tone, then you are going to TelCo voice messaging and that is a TelCo provider setting.


- Dave S. -

You can never appease your ideologue opponents.

Page 1 of 2 1 2

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,709 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Curlycord), 101 guests, and 252 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5