|
|
|
|
Joined: Oct 2004
Posts: 76
Member
|
OP
Member
Joined: Oct 2004
Posts: 76 |
Can a SLMO24 and a IVM24 Xpressions compact be in the same chassis?
Also, can two SLMO24 cards be in the same chassis?
Im using version 6 Hipath software in a Officepro cabinet.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 2,116 Likes: 2
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,116 Likes: 2 |
we dont have the IVM 24 here, but the officepro should run 2 slmo and 1 IVM 24 cards, once you have 3 spare slots.
Make sure you have enough power supplies in the system to run them all
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
The only rule of thumb you need to follow is that the IVM has to be in the last slot of the basic cabinet. It takes up 24 time slots. Also when adding the SLMO's if you put them in the same time slot you can't add anymore cards to that time slot due to the master/slave ports of the SLMO
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Oct 2004
Posts: 76
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 76 |
So you are saying is that you cannot have a SLMO24 and a IVM L24 in the same cabinet?
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
Yes you can have them in the same cabinet. Is the Pro a 3700 or 3750?
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Oct 2004
Posts: 76
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 76 |
Its a 3750 (floor mount). I am asking the question becuase the Xpressions service manual states "The Xpressions Compact-board of the type L24 and a SLMO24 should not be joint owners of the
same PCM-bus. In the master/slave mode of the SLMO24, the complete accessibility is not guaran-
teed."
Is a PCM bus the entire backplane or is there more then one PCM bus in the chassis?
|
|
|
|
|
Joined: Jan 2007
Posts: 2,116 Likes: 2
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,116 Likes: 2 |
The vm card should be put in beside the psu in slot 8. don't put in the slmo 24 in slot 6 or 7 the PCM segments ore slot 2 + 3, 4 + 5, and 6,7,+8
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
131
guests, and
302
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
