|
|
|
|
Joined: Jul 2005
Posts: 1,333
Member
|
OP
Member
Joined: Jul 2005
Posts: 1,333 |
Hi All.
I have had a problem on a couple of sites that are using the telco voicemail for messaging on analog trunks. The problem is that if CLID is turned on in MB14.02.10 when the inband MWI on / off signal is sent the fones start to ring and then go to a very scratchy ring.
According to the feature manual there is a feature called "CO Message Waiting Indication" I have tried to set this up at home and test but it will not work.
Description
This feature provides a Message Waiting indication when Voice Mail from the Central Office is used. The CO provides this feature using Visual Message Waiting Indication (VMWI) standards. Visual Message Waiting Indication alerts a user that a message is present in their voice mail box. When VMWI is provided, the UNIVERGE SV8100 provides a flashing LED on a line key assigned with the trunk appearance.
The VMWI standard supported by the UNIVERGE SV8100 includes:
ï¯ Type 1 Caller ID, FSK without power ringing using the MDMF protocol
ï¯ Type 1 Caller ID, FSK without power ringing using the SDMF protocol
Anyone done this in the US / Canada??
TIA
Regards,
Paul W
Now back to a 0 day week. Love these 7 day weekends.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2006
Posts: 19
Member
|
|
Member
Joined: Nov 2006
Posts: 19 |
yes. first off try to turn off simultious ring on the trunks.
|
|
|
|
|
Joined: Jul 2005
Posts: 1,333
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 1,333 |
Thanx Mike for the tip.
I guess it's a carrier difference between their MWI software and the SV8100 system. On my home landline the telco MWI still causes the fone to ring but using my SIP carrier via a Linksys PAP2T the MWI works as described in the feature manual.
Guess this is one for the too hard bin as I suspect that the carrier will not want to know about it... Will pass the info on to our dealers who strike this problem..
Regards,
Paul W
Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
|
Joined: Sep 2006
Posts: 92
Member
|
|
Member
Joined: Sep 2006
Posts: 92 |
Look in the following
MB 15-17-01 make sure that you have the trunk that has the MWI is turn on to except it.
MB 20-06-01 make sure your phone is in the correct class of service.
MB 20-07-23 make sure that turned on in the class of service the.
These are the main 3 option to turn on the light.
The next think is. Is the Telco sending the studded dial tone when there is a message?
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
136
guests, and
297
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
