sundance-communications.com Forums More-Phone & VoIP Systems VoiceMail Systems and Programming Audix

When i dial 0 from another extension and day and nite attd. is activated why does it go to the audix access message? thanks for any help.

It could be that the zero button on you attd. setup is set up for a specific route. If it only happens on that phone extension, I would check the COS for the extension. Was the person who had the extension previously set up for a unique situation.

Good Luck

2wire

i apologize, it's all extensions...

You Have mail

So what your saying is that pressing 0 from any extension in your office sends you do audix. I have seen this happen if the programmed operator position is unplugged/unavailable. Is your QCC or DLC console plugged in? What happens when outside callers press 0?

There is no problem from outside because when you dial the main number you get the auto attd. The problem is when you dial 0 from any extension and the day and nite are activated you get the audix access message. Now when you dial the console extension you do get the auto attd.

You need to look at the Intuity Audix programing, Look at the convering Ext. on the users mail boxs and the system covering Ext.