|
|
|
|
Joined: Aug 2008
Posts: 19
Member
|
|
Member
Joined: Aug 2008
Posts: 19 |
I have a 4 cabinet XTS with 2 PRI cards in Slot 05 and 06 with the all of the necessary connectors between the PRI's. In order to cut back on the telecom expense, the 1st PRI was disconnected and the lines taken out of service but the card was never removed. I am now seeing an extremely high count of SLIP Alarms. My logic is to remove the 1st PRI Card and make the programming changes to completely take it out of the system. I just wanted to get a second opinion.
MWells
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
Check your clocking and cables. Most likely, the 1st PRI was clocking off the TelCo and the 2nd PRIB was then clocking off the 1st PRIB.
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
|
|
Joined: Aug 2008
Posts: 19
Member
|
|
Member
Joined: Aug 2008
Posts: 19 |
I thought about that after I sent the post . I will remove the cable and flip the switch up on the PRI being used.
MWells
|
|
|
|
|
Joined: Jan 2012
Posts: 28
Member
|
|
Member
Joined: Jan 2012
Posts: 28 |
As noted, you really want to clock from the provider, the BITS in the CO is likely locked to a much better frequency reference than is built into the system. Use theirs, especially if you're getting clock slips.
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
117
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
