web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Feb 2010
Posts: 581
Likes: 6
Member
****
OP Offline
Member
****
Joined: Feb 2010
Posts: 581
Likes: 6
Hello all,

I recently acquired a Partner system with 5 slot carrier, R4.1 Processor, R4.1 206E, R3.1 400E, and R3.1 206 module.

For some reason, extension 12 is always busy on both intercom lines. Picking up on either intercom line provides a busy signal.

It isn't a bad port, because all of the external lines are accessible if I press one of the line keys.

I checked system programming and there doesn't appear to be any form of restrictions on the extension, so I'm not sure what's causing the busy tone to activate as soon as I pick up to make an intercom call.

Incoming intercom calls work fine, and same with voice calls. In addition, upon trying to transfer an outside call on extension 12, there is no intercom dial tone, just silence.

I'm honestly at a loss for what is causing this. I've tried both system and standard POTS phones on the port to the same result.

Any input is appreciated.

Thanks


Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Jun 2005
Posts: 83
Member
Offline
Member
Joined: Jun 2005
Posts: 83
try swapping your 206 modules and see if the trouble follows the card.

Joined: May 2002
Posts: 4,296
Likes: 7
Moderator-Avaya, Polycom
*****
Online Content
Moderator-Avaya, Polycom
*****
Joined: May 2002
Posts: 4,296
Likes: 7
Plug set directly into port and see if it still happens

Joined: Jul 2001
Posts: 3,342
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,342
Likes: 10
Use #399 to copy from a working extension number to 12, and also check #603, #604, #605, #607

Joined: Feb 2010
Posts: 581
Likes: 6
Member
****
OP Offline
Member
****
Joined: Feb 2010
Posts: 581
Likes: 6
Sorry for my delay in response to you all.

Dutch: Switched the 206's and I'm still getting a busy.

Hitechcomm: Plug set directly into port? I'm a little confused... how else would I use extension 12?

Touch Tone: Also no luck with this.

I'm just going to not use the port. I don't want to risk messing anything else up.


Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
have you swapped the phone with a known good one ?

Quote
Plug set directly into port? I'm a little confused... how else would I use extension 12?

what he is saying is rather than come out off the module to station wiring , just plug the phone directly into the module



Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
Have you tried defaulting the system? Do that and see if the problem remains when it comes back up. If so there is likely a problem with the processor.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Joined: Dec 2005
Posts: 9,162
Likes: 8
Spam Hunter
*****
Offline
Spam Hunter
*****
Joined: Dec 2005
Posts: 9,162
Likes: 8
Program one of the other extensions with a DSS button for x12 and see if it shows up busy....even when there is no phone plugged into the port itself.

I suspect that x12 is bad.

Last edited by dexman; 02/11/13 06:10 PM.

I Love FEATURE 00
Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
Originally Posted by dexman
I suspect that x12 is bad.

Yes.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
Joined: Feb 2010
Posts: 581
Likes: 6
Member
****
OP Offline
Member
****
Joined: Feb 2010
Posts: 581
Likes: 6
Extension twelve does not show as busy on my DSS button on the 34D I've got on extension 10.

I got the system cabinet (without the R3.1 206 module, I ordered that later) from our local Armed Forces recruiting office, they didn't need it anymore and they did tell me it "acted funny" before it was replaced with a Nortel BCM.

I don't think it's worth defaulting the system because I agree with Hal- it's got to be the processor.

Thanks all for your input.


Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5