|
|
|
|
Joined: Feb 2005
Posts: 40
Member
|
OP
Member
Joined: Feb 2005
Posts: 40 |
At one of our locations running AXXESS 8.2 we have had a problem the last 2 Friday mornings where users are unable to dial out and callers are unable to dial in on ANY of the phone numbers.
Fro users calling out it appears that the call is going out, but they get no ringback or anything.
For callers trying to call in they just get a standard busy signal.
Powering the cabinet off and then back on seems to resolve the problem. I have checked to make sure that system reset times are at 3am M-W-F and that the system time is correct.
does anyone have any suggestions?
Dan L Armstrong
WinWholesale
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
|
Member
Joined: Sep 2005
Posts: 840 |
Do you know if yer CPC f/w is up to date? You want to be on at least 2.1.4. You can check it by browsing to the CPC.
|
|
|
|
|
Joined: Feb 2005
Posts: 40
Member
|
|
OP
Member
Joined: Feb 2005
Posts: 40 |
Currently shows Boot version 2.14
Dan L Armstrong
WinWholesale
|
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
Do you have T1 circuits? maybe resetting the system cleared the T1? What do the error logs show?
Rhett
|
|
|
|
|
Joined: Feb 2006
Posts: 36
Member
|
|
Member
Joined: Feb 2006
Posts: 36 |
There is no such boot version as 2.14
Newest Versions
Boot code: 2.1.12 (VERY IMPORTANT)
CPC DB ver: be 8.232e
VM ver: 8.234
T1/E1: $78
boot code 2.1.4 has many clocking problems. I would definatley get that upgraded. The issue could be a mix of T1 and CPC clocking issues.
|
|
|
|
|
Joined: Aug 2005
Posts: 49
Member
|
|
Member
Joined: Aug 2005
Posts: 49 |
I was looking through the listings and this seemed very interesting. I have had complaints on a 9.006 Axxess system with PRI of dropped calls, not being able to call out, being able to call in through the attendant and being dropped trying to access an extensions. The newest one is a fast busy but with a static tone with it. I do have the 2.1.4 firmware version on my CPC. Also, can the PRI being next to the EVMC cause problems?
Thanks
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
118
guests, and
340
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
