|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
Anyone successfully setup SIP trunks from Level3 on an 8100?
I can receive inbound calls, but cannot call out.
Nec TAC says my system is setup properly, but I am hoping someone may have a guide or some pointers for Level3 SIP.
D
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
We get old too soon, smart too late
|
|
|
|
|
Joined: Jul 2010
Posts: 38
Member
|
|
Member
Joined: Jul 2010
Posts: 38 |
Make sure that you have your public IP specified in the NAPT IP setting?
Are you using user-authentication (sip registration) or public IP authentication? If registered, can Level3 confirm you're constantly registered okay?
You get ring and speech on the inbound?
Last edited by solidpro; 03/29/13 06:42 PM.
- Now you can go out and "get the big bucks."
|
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
Get ring and speech on inbound, inbound calls work 100%.
I do have the public IP in the NAPT IP setting.
Wireshark traces show when an outbound call is attempted there is NO traffic from the 8100 to the firewall... very odd..
I am going back Tuesday to run more Wireshark with a tech from NEC and a tech from Cisco on a webex...
These are un registered SIP broadsoft config.
Thanks for the replies, I'll update on what I find Tuesday.
D
|
|
|
|
|
Joined: Jul 2010
Posts: 38
Member
|
|
Member
Joined: Jul 2010
Posts: 38 |
As far as I know you have to have the public IP specified within the "NAPT Router" command - can't remember off the top of my head where it is, but from what I've seen, if you don't the SIP provider doesn't know where your packets have originated from (it appends the data with your private IP).
- Now you can go out and "get the big bucks."
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Have you played with the 10-29-14 settings? I'm sure you are already using ARS.
|
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
The pbx had been reprogrammed back and forth with authentication and non-authentication method when I was trying to get it to work and it had geeked up the database somehow and I was not sending out anything when trying to place a call.
I re-initialized the system and did some testing with NEC using Wireshark.
Level 3 uses Authenticate-on-Invite method and this required some eunique programming, but we got it figured out.
10-40
10-23
10-28-04
D
|
|
|
|
|
Joined: Jul 2005
Posts: 1,336
Member
|
|
Member
Joined: Jul 2005
Posts: 1,336 |
Wonder if it's got something to do with the carrier table in PRG 10.29.14 We have found that what work on one carrier does not aways work on another with the same carrier set.. I think down here we are up to carrier O..
Last edited by paulw; 04/02/13 05:17 PM.
Regards,
Paul W
Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
Forums84
Topics94,491
Posts639,864
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
