|
|
Joined: Apr 2008
Posts: 228
Member
|
Member
Joined: Apr 2008
Posts: 228 |
Hello all, We are trying to upgrade an elite 192 S. 4.50 from a T1 to a PRI. FOr the life of me i cant figure out what i missed or did wrong. I deleted all t1 programming and removed the DTI card from slots 3,2,1 and then installed the PRT (pri) card and began programming, however it will only allow me to add 4 channels to the PRT and not allow me to add the PRt to slots 2 and 3.
How do I get the PRT to assign more then 4 channels??
Thanks in advance!!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
What do you have assigned in 7-1?
|
|
|
|
Joined: Apr 2008
Posts: 228
Member
|
Member
Joined: Apr 2008
Posts: 228 |
I have PRT assigned to slot 1 Software revision does not have anything but prt. I know in the IPk and better it would show up as prt24 but not in this.
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
Member
Joined: Apr 2007
Posts: 1,439 |
Sounds like you've dealt with this before, so you know the drill on removing the DTI card in reverse of how you would install one...?
Re-install the DTI card. When you un-program it, make sure you remove all the channels in 1-11 for all 3 slots.
How many phones on this system? If it still won't let you re-assign the card, how much of a headache to initialize and re-prog from scratch? Couldn't possibly take more than a few hours. Better than spending 4 or 5 hours letting it get the better of you maybe??
D
|
|
|
|
Joined: Apr 2008
Posts: 228
Member
|
Member
Joined: Apr 2008
Posts: 228 |
Yeah definitely the way to go DogHart!! The last time i did one of these was 4 years ago! So I may have missed something in the reverse order. But I think that may be it 1-11 for all 3 slots!
It must be that I only did slot 1! I can put the dti card back and the same thing I can only assign 4 channels!
I just thought I missed something else.
Thanks guys!!
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Don't you have to go into 13-1 or 2 or 3 or 4 or 5 & enable the channels? I think they are assigned in groups of 4.
Last edited by DrPbx; 11/02/13 08:45 PM.
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
134
guests, and
30
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|