|
|
Joined: Nov 2010
Posts: 18
Member
|
|
Member
Joined: Nov 2010
Posts: 18 |
Trying to program flex button for LNR using 214650. Can program it to 622, 604, 631, but trying 650 does nothing. I know the Speed # will do LNR, but nice to have a button with the label. Any suggestions much appreciated. Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
The code to program LNR is also speed # or 650 (no 4) when the button is programmed at the phone. If you are trying to program a button from admin, the code is button number and 4650. I have not used that function however, I prefer to program the button at the phone itself.
Last edited by Derrick; 11/29/13 10:31 PM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Nov 2010
Posts: 18
Member
|
|
Member
Joined: Nov 2010
Posts: 18 |
Tried both Key Station Program Mode and user Flex Button Programming. For both modes, can erase a button programmed for LNR, but cannot set the button to LNR - get fast beeping signal.
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Procedure for programming LNR...hit speed twice, press user key, hit speed # and hopefully will receive confirmation beeps. This cannot be done to a loop, pool or line key unless the feature to allow user programming of those keys is enabled.
Last edited by Derrick; 12/17/13 10:24 PM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Nov 2010
Posts: 18
Member
|
|
Member
Joined: Nov 2010
Posts: 18 |
I have looked through the programming manual for a setting to enable/disable user programming of the flex buttons and can't find it, where is it?
Is it possible the LNR default of 650 been changed to something else? Is there a way to see what LNR is set to?
Thanks.
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Even it the LNR code were changed speed # does the same thing...the code 650 was designed to be used when programming the button from admin just like ringing or other features. Enabling co line/pool/loop keys is done in flash 50 or 51 page A programming. If the line key is not a loop or pool or co line it is always available for user programming.
Why not just use the soft key with LNR?
Last edited by Derrick; 12/17/13 10:29 PM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,522
Posts639,996
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
247
guests, and
45
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
